• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
rear end conversion
I'm changeing the rear end in a 72 mach1 to a 1995 8.8 cobra w/disk brakes but cant figure out what u-joint to use.....any help? thanks
for me i'd find out the part number of the u joint in the car now. then the same info on the '95, then contact maybe summit or jegs and see that they say... or just call they might know what u want anyways.
The only way to be sure what you need is to measure them (yoke and driveshaft) and then select the u-joint by size, not by car-year, etc.


“If you can't explain it simply, you don't understand it well enough.”
--Albert Einstein
Cobra used the 1330 U joint based on what I looked up, which is the same as what the 71-73 Mustangs came with.

[Image: 1_01_07_15_8_53_18.png]

"I love my Hookers!" and "Get some Strange" probably have a different connotation to non automotive enthusiasts!
thanks guys, I need a 1310 to 1330
(05-07-2019, 02:39 PM)don blanchard Wrote: thanks guys, I need a 1310 to 1330

I believe that's what I used for my 8.8" swap from an explorer also.


1971 Mach 1
408C Stroker
C4 w/3,000 stall
8.8" Rear w/3.73's
Disc brakes all way around.

[Image: 28ivsix.png]

Share Thread:  

Possibly Related Threads...
Thread Author Replies Views Last Post
  C6 conversion to Toploader 4 speed Manu Mach1 4 111 3 hours ago
Last Post: tony-muscle
  1973 FMX transmission conversion JULIENHATSWELL 8 200 Yesterday, 07:50 AM
Last Post: Pegleg
  351 Top end reinstall questions scgamecock 2 193 02-22-2019, 05:54 PM
Last Post: kcmash
  Regear Rear End icejawa 30 1,074 02-07-2019, 01:23 PM
Last Post: Hemikiller
  Recommended Rear End Ratio - 6 Speed TheDude 17 664 12-27-2018, 08:28 PM
Last Post: boilermaster
  Rear Axle Housing Dimensions tony-muscle 6 322 11-22-2018, 01:12 AM
Last Post: tony-muscle
  rear end markc 6 480 10-14-2018, 12:24 PM
Last Post: markc
  Efi conversion Cainsable 6 807 09-15-2018, 10:56 AM
Last Post: fangstang

Users browsing this thread: 1 Guest(s)