• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
rear end conversion
#1
I'm changeing the rear end in a 72 mach1 to a 1995 8.8 cobra w/disk brakes but cant figure out what u-joint to use.....any help? thanks
  Reply
#2
for me i'd find out the part number of the u joint in the car now. then the same info on the '95, then contact maybe summit or jegs and see that they say... or just call they might know what u want anyways.
  Reply
#3
The only way to be sure what you need is to measure them (yoke and driveshaft) and then select the u-joint by size, not by car-year, etc.
http://media.spicerparts.com/cfs/files/m...e=original

https://www.neapcocomponents.com/images/...901018.pdf



“If you can't explain it simply, you don't understand it well enough.”
--Albert Einstein
  Reply
#4
Cobra used the 1330 U joint based on what I looked up, which is the same as what the 71-73 Mustangs came with.

[Image: 1_01_07_15_8_53_18.png]

"I love my Hookers!" and "Get some Strange" probably have a different connotation to non automotive enthusiasts!
  Reply
#5
thanks guys, I need a 1310 to 1330
  Reply
#6
(05-07-2019, 02:39 PM)don blanchard Wrote: thanks guys, I need a 1310 to 1330

I believe that's what I used for my 8.8" swap from an explorer also.

Kevin

1971 Mach 1
408C Stroker
C4 w/3,000 stall
8.8" Rear w/3.73's
Disc brakes all way around.

https://youtu.be/SoW1fhaFPzY  Burn Out Video. 

[Image: 044.jpg]
  Reply
Share Thread:  


Possibly Related Threads…
Thread Author Replies Views Last Post
  460 Rear Main Seal Installation clevelandcoupe 3 158 05-23-2020, 04:06 AM
Last Post: Gregaust
  Rear end tag decode thundertc64 13 11,203 12-20-2019, 07:49 PM
Last Post: Stanglover
  Rear Axle bearing and retainer Parkka 11 695 11-26-2019, 07:10 PM
Last Post: Stanglover
Wrench 351 Cleveland AOD conversion 71melbatoast 7 708 09-24-2019, 04:43 PM
Last Post: mustang7173
  Rear diff oil change mustangandy 8 716 08-05-2019, 08:20 AM
Last Post: Don C



Users browsing this thread: 1 Guest(s)