• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
rear end and disc brakes
looking for a 9 inch rear end with disc brakes already mounted to it, havent done a lot of searching yet, figured this is a good place to start. thanks! Cool

<img src="http://www.7173mustangs.com/gallery/1_12_09_14_10_32_45.png" />

- Nik
You probably already know this, but it takes more to do the retrofit than just putting a new rear end in it. Several guys on here have done it, I believe it takes a new M/C, proportioning valve, maybe some other things.

That said, you can find that setup through summit racing I think.


[Image: 25yvyp3.jpg]
Are you looking to buy one or are you looking for places where you might get one or ?? Perhaps the 'want to buy' section would be more effective.

It's smart, you need to upgrade to a 9" anyways to handle the horsepower you are looking to eventually do. If you can find a deal on a 9" with the brakes already done, you are a lot farther than most. Keep watching. Patience and ready cash is the key to getting this done.

73 Convertible - 351C/4V CC heads/4bolt/forged flat tops/comp 270/rhodes/mallory unilite/tri-power/hookers/glasspacks/c6/3.50 limited slip/Gear Vendors/Global West sub frames, strut rods and shelby style traction bars/ Rear sway bar/tilt steering (not original)

Pics of modifications included in:
Thanks guys!

<img src="http://www.7173mustangs.com/gallery/1_12_09_14_10_32_45.png" />

- Nik

I have either the "Strange" or "Currie" complete rear end on my "Wish List" and will be making the purchase around the end of the year. This will be for "FIRE", my '73 Mach 1 that will have a 545 Stoker.

[/i]I understand there are a number of Companies who offer the rear end. You do well to continue to check into what will work for you and your application.


Do the RIGHT thing.
I put an 8.8 in mine out of a explorer sport track. It was already set up from the factory with 373 gears posi and disc brakes. Was VERY close to the same width as the stock mustang rear and only need to weld on new spring perches to get it in. Was an easy weekend project. My cleveland is right around 400hp and I have had no trouble in the last 3 years its been in there.


1971 Mach 1
408C Stroker
C4 w/3,000 stall
8.8" Rear w/3.73's
Disc brakes all way around.

[Image: 28ivsix.png]

Share Thread:  

Possibly Related Threads...
Thread Author Replies Views Last Post
  front disc brake conversion nailpounder 16 657 05-04-2018, 08:37 AM
Last Post: Stanglover
  rear wheel bearings... hmmm Casperfast 5 362 04-14-2018, 09:28 AM
Last Post: JSOK
  Power to Manual brakes? CalgaryChris 8 308 03-17-2018, 07:28 AM
Last Post: delawarebill
  Front disc brake swap master cylinder? Horsin' Around 10 579 12-18-2017, 09:58 PM
Last Post: imusa76
  Cobra brakes Mjordan 2 363 12-06-2017, 07:29 AM
Last Post: Mjordan
  Question About Rear Shocks Scotty 8 756 08-23-2017, 01:21 PM
Last Post: protouringstang73
  Rear Tire Rubbing on One Side ptrmzr 12 1,839 08-22-2017, 10:23 PM
  Anyone have Hydraulic Boosted Brakes? jowens1126 16 962 07-27-2017, 04:42 PM
Last Post: protouringstang73

Users browsing this thread: 1 Guest(s)