• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Rear brakes hanging up.
#1
My rear brakes were hanging up a bit today. It’s happened a few times over the last year but once I let it sit for a little while it’s fine again. Seems like if I brake harder than normal the rear brakes don’t release completely and take time for the pressure to bleed off. I have the stock manual drum brake master cylinder but I am running disc brakes at all 4 corners. I have had this same set up for close to 10 years with no problems. Does the stock drum brake master cylinder have a check valve that could be sticking and holding line pressure on my rear brakes?

I have all the parts needed to install power disc brake master cylinder. All sitting in the garage ready to go. Looks like I will be doing that swap in near future. I have all new cross drilled and slotted rotors, pads, hoses, lines, rebuilt booster and master, all ready to go. I’m hoping that will take care of my issue.

Kevin

1971 Mach 1
408C Stroker
C4 w/3,000 stall
8.8" Rear w/3.73's
Disc brakes all way around.

[Image: 044.jpg]

https://youtu.be/SoW1fhaFPzY
  Reply
#2
Yes
https://www.freeasestudyguides.com/resid...valve.html



“If you can't explain it simply, you don't understand it well enough.”
--Albert Einstein
  Reply
#3
(07-13-2019, 04:16 PM)Don C Wrote: Yes
https://www.freeasestudyguides.com/resid...valve.html

Thanks Don. I kinda thought that. Since my car was originally all drums would there be a check valve for the front brakes too? The master cylinder is getting pretty old. Over 15 years. So it’s probably sticking. Need to get it in the garage and get the power booster swap done!!

Kevin

1971 Mach 1
408C Stroker
C4 w/3,000 stall
8.8" Rear w/3.73's
Disc brakes all way around.

[Image: 044.jpg]

https://youtu.be/SoW1fhaFPzY
  Reply
Share Thread:  


Possibly Related Threads…
Thread Author Replies Views Last Post
  Rear factory sway bar addition? cwalker509 3 137 10-09-2019, 03:39 PM
Last Post: Mister 4x4
  Squeaky Leaf Springs/rear suspension andy72 4 179 09-22-2019, 12:08 PM
Last Post: Don C
  Not your normal wheel/tire/brakes fitment thread. DeathWobble 12 511 08-27-2019, 01:24 PM
Last Post: DeathWobble
  Rear sway bar Instructions Robsweden 11 723 08-12-2019, 08:25 AM
Last Post: Robsweden
  1973 mach 1 351 cleveland rear brakes Nige 9 474 07-29-2019, 06:04 PM
Last Post: Don C
  Rear Suspension Torque Specs 73pony 8 465 07-26-2019, 12:45 PM
Last Post: Carolina_Mountain_Mustangs
  Rear disc brake conversion issues Erik72 13 1,163 07-09-2019, 11:18 AM
Last Post: Don C
  Rear Suspension Staggered Shocks Question 73pony 11 545 06-25-2019, 01:46 PM
Last Post: 73pony



Users browsing this thread: 1 Guest(s)