• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Rear Brake Lines
#1
I have a 71 Mach 1 project that someone else started and my son and I took over. I have the 2 rear brake lines that were attached to the axle and a new hard line was already ran to the rear of the car. I need help identifying the proper part or parts to attach the lines. Any help is appreciated.
  Reply
#2
Hello motiv8r,

The brake lines, rear axle, runs from the brake wheel cylinders to the brake hose junction block that is mounted to the vent tube of the rear axle tube. Then, the flex tube of the brake hose assembly is clipped to a bracket on the car. This is where the front to rear brake hose connects.

motiv8r,

Here is a picture of the rear brake junction with flexible tube.



[Image: 2e2qlbc.jpg]
  Reply
#3
mustang7173;108800 Wrote:Hello motiv8r,

The brake lines, rear axle, runs from the brake wheel cylinders to the brake hose junction block that is mounted to the vent tube of the rear axle tube. Then, the flex tube of the brake hose assembly is clipped to a bracket on the car. This is where the front to rear brake hose connects.

motiv8r,

Here is a picture of the rear brake junction with flexible tube.



[Image: 2e2qlbc.jpg]

Thanks for the help!!
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  brake fluid / nailpounder 2 133 02-11-2019, 12:33 PM
Last Post: nailpounder
  wilwood disc brake question nailpounder 3 228 01-21-2019, 07:45 PM
Last Post: nailpounder
  Rear ended and wheel fitment Mjordan 3 262 01-19-2019, 05:54 PM
Last Post: Mjordan
  Shock Tower Brake line grommets jowens1126 7 249 01-01-2019, 07:29 PM
Last Post: Stanglover
  Brake Booster Rebuild Omie01 6 256 12-28-2018, 08:15 AM
Last Post: Omie01
  Changing out brake lines for Stainless jowens1126 17 619 12-12-2018, 07:56 AM
Last Post: mustang7173
  Half leaf on rear springs? Stanglover 17 2,435 11-26-2018, 05:10 PM
Last Post: Stanglover
  Rear wheels offset Manu Mach1 10 499 11-09-2018, 08:01 AM
Last Post: Manu Mach1



Users browsing this thread: 1 Guest(s)