• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Ram Air question
#1
Wondering if someone with factory 351C Ram Air could give me a measurement. What I need is the height to the top of the seal for the air cleaner. If you could put a straight edge across the area where the mounting bolts for the fenders are and then take a measurement from the straight edge in front of the carb to the top of the rubber seal would give me the measurement that I need.
TIA
-jbojo.


Attached Files Thumbnail(s)
   

-john
(jbojo)
351C 4V cc heads, 10.5 : 1 CR, 290 Herbert cam, Flat top forged pistons, forged connecting rods, Atomic efi,
C6 with Gear Vendor overdrive, 3.89 Tru Trac, Hooker Super Comp with 2 1/2" Pypes Exhaust.        

Some Mod pictures can be seen at:

  Reply
#2
I'm assuming you want original specs... Different guys use different manifolds.

[Image: Image3.png]
Jim
  Reply
#3
JimNiki;162393 Wrote:I'm assuming you want original specs... Different guys use different manifolds.

I am using a different manifold and I can use that measurement to determine if my application will be too high. Once I have that I will measure against mine and I'll know if it will fit. That's why I am asking for a measurement from a common reference point instead of from the manifold itself.
thx
-jbojo

-john
(jbojo)
351C 4V cc heads, 10.5 : 1 CR, 290 Herbert cam, Flat top forged pistons, forged connecting rods, Atomic efi,
C6 with Gear Vendor overdrive, 3.89 Tru Trac, Hooker Super Comp with 2 1/2" Pypes Exhaust.        

Some Mod pictures can be seen at:

  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Air Cleaner??? 71_resurrection 4 207 06-18-2018, 12:38 AM
Last Post: 71_resurrection
  Distributor Question 73pony 8 193 06-12-2018, 12:55 AM
Last Post: OzCoupe72
  351C Stroker / TKO 600 bellhousing question tony-muscle 11 1,015 03-29-2018, 03:18 PM
Last Post: tony-muscle
  FMX Transmission casting number question? Monterey 6 329 03-01-2018, 11:45 AM
Last Post: Vicus
  ok probably dumb question but...... libram 8 602 01-09-2018, 10:41 PM
Last Post: rotorr22
  Ram Air friendly distributer cigarguy 6 628 11-15-2017, 11:18 AM
Last Post: Stanglover
  Non flapper ram air question cigarguy 8 713 11-14-2017, 11:17 PM
Last Post: cigarguy
  RPM air gap manifold fit under the hood ok? vikingsandpintos 5 780 11-08-2017, 08:23 AM
Last Post: turtle5353



Users browsing this thread: 1 Guest(s)