• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Ram-Air Air Cleaner
#1
Does anyone have a good picture overview of the connections for the Ram-Air Air Cleaner portion of the setup? Specifically, the flapper in the snorkel....I know the aftermarket Ram-Air Air Cleaners are decent but they seem to be lacking the connection for this on the underside of the cleaner. Or am I totally missing something????

BDK
  Reply
#2
I haven't gotten mine yet - but you could post pics of yours so I can drool and live vicariously through you until I'm ready for mine. Wink Big Grin

Eric

[Image: mach1sig2.gif]
  Reply
#3
Mister 4x4;109039 Wrote:I haven't gotten mine yet - but you could post pics of yours so I can drool and live vicariously through you until I'm ready for mine. Wink Big Grin

Smile I'll see what I can do about getting a photo up for ya Eric......but not too much to see, just like the shots on OMS, CJ and NPD...black ari cleaner... Smile

BDK
  Reply
#4
BDK;109040 Wrote:
Mister 4x4;109039 Wrote:I haven't gotten mine yet - but you could post pics of yours so I can drool and live vicariously through you until I'm ready for mine. Wink Big Grin

Smile I'll see what I can do about getting a photo up for ya Eric......but not too much to see, just like the shots on OMS, CJ and NPD...black ari cleaner... Smile

BDK

You're a good man! thumb Tongue

Eric

[Image: mach1sig2.gif]
  Reply
#5
Here is a good article, and what I used.

http://www.mustangmonthly.com/techarticl...3_mustang/

1972 H-code Mach1
2010 GT Premium
2015 Hyundai Sonata Sport 2.0T
1995 F150- The "home depot" machine
2012 Harley Davidson Road Glide Ultra
  Reply
#6
You are correct no one makes the bi-metal vacuum pod to control the cold air snorkel flapper

Most guys do not have the heat riser tube and shield to make use of the warm air start up anyways.
It only helps for cold start / choke operation

As for that article...
It does not address the bi-metal pod.
Also if you install the DII ram air, you probobly want to...
1- remove the dii sticker off the plenum
2- remove the gold metric nuts and bolts holding the flappers to the plenum - they are shipping hardware
Use the black screws from AMK - like the original ones
Don
3- use the black screws all around the plenum

Ohio Mustang Supply
440-949-2556

[Image: oms_sig_banner.jpg]
  Reply
#7
OMS;109088 Wrote:You are correct no one makes the bi-metal vacuum pod to control the cold air snorkel flapper

Most guys do not have the heat riser tube and shield to make use of the warm air start up anyways.
It only helps for cold start / choke operation

As for that article...
It does not address the bi-metal pod.
Also if you install the DII ram air, you probobly want to...
1- remove the dii sticker off the plenum
2- remove the gold metric nuts and bolts holding the flappers to the plenum - they are shipping hardware
Use the black screws from AMK - like the original ones
Don
3- use the black screws all around the plenum

Don, That is exactly what I am looking for!!! thanks as always. Trainey, thanks for the link to the Mustang Monthly article.....

BDK
  Reply
#8
BDK;109117 Wrote:
OMS;109088 Wrote:You are correct no one makes the bi-metal vacuum pod to control the cold air snorkel flapper

Most guys do not have the heat riser tube and shield to make use of the warm air start up anyways.
It only helps for cold start / choke operation

As for that article...
It does not address the bi-metal pod.
Also if you install the DII ram air, you probobly want to...
1- remove the dii sticker off the plenum
2- remove the gold metric nuts and bolts holding the flappers to the plenum - they are shipping hardware
Use the black screws from AMK - like the original ones
Don
3- use the black screws all around the plenum

Don, That is exactly what I am looking for!!! thanks as always. Trainey, thanks for the link to the Mustang Monthly article.....

BDK

Also I have a kit we make with all hardware, filters , hoses 529.95

Ohio Mustang Supply
440-949-2556

[Image: oms_sig_banner.jpg]
  Reply
#9
As Don said, I do not have the heat riser hooked up at all, I am running headers. I also changed to a manual choke.

1972 H-code Mach1
2010 GT Premium
2015 Hyundai Sonata Sport 2.0T
1995 F150- The "home depot" machine
2012 Harley Davidson Road Glide Ultra
  Reply
#10
                    Eric here are the pics of the Air Cleaner. Notice the shot with my finger, that would be the area where the bi-metallic strip Don mentioned would go if they made it......
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Last ram air question i promise eventhorizon 9 788 07-21-2018, 10:28 AM
Last Post: Carolina_Mountain_Mustangs
  Air Cleaner??? 71_resurrection 4 277 06-18-2018, 12:38 AM
Last Post: 71_resurrection
  Ram Air friendly distributer cigarguy 6 679 11-15-2017, 11:18 AM
Last Post: Stanglover
  Non flapper ram air question cigarguy 8 823 11-14-2017, 11:17 PM
Last Post: cigarguy
  RPM air gap manifold fit under the hood ok? vikingsandpintos 5 831 11-08-2017, 08:23 AM
Last Post: turtle5353
  Aluminium-Hose between Canister & Air-Cleaner Duck 19 1,582 10-28-2017, 09:25 AM
Last Post: SteveO_71
  Blue Thunder/ Ram Air Omie01 0 365 09-16-2017, 10:59 AM
Last Post: Omie01
check Solved or not 72 351 Qcode air cleaner decal Carguy4sp 28 1,978 08-24-2017, 08:36 AM
Last Post: jpaz



Users browsing this thread: 1 Guest(s)