• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Radiator grille cover
#1
I met a guy at an All Ford show two weeks ago that installed a radiator cover on his car and it looked great. It did a great job of covering that ugly gap between the grille and the radiator.

I'm really thinking about buying one for my car. I was wondering  has anyone here purchased and installed one. If so what are your thoughts 

Here's the one I found.

https://www.mustangsplus.com/1971-1972-1...Cover.html

[Image: 14239lg-01.jpg]
  Reply
#2
I've heard that these don't fit properly and will need some adjustment.

[/url][Image: mbpsrsig3_zps456db2cb.png]

[url=http://s165.photobucket.com/user/MPBsr25/media/mbpsrsig3_zps456db2cb.png.html]
  Reply
#3
(08-07-2019, 07:51 PM)mpbsr Wrote: I've heard that these don't fit properly and will need some adjustment.
Ok thanks for the info
  Reply
#4
(08-08-2019, 04:38 AM)rolandmhall Wrote:
(08-07-2019, 07:51 PM)mpbsr Wrote: I've heard that these don't fit properly and will need some adjustment.
Ok thanks for the info

Are you in a particularly hot ambient environment ? In my climate (in England - UK) it might not matter.

But ...Made out of thermally resistant material?  Chin

Sorry - but the engineering devil on my shoulder just popped out -- the whole point of a radiator is to radiate heat. When you are stood in traffic and the rush of air has gone, the standard process of convection (Hot Air rises) could be hampered by sticking what is essentially loft insulation over the top  of the very thing that needs to cool down. 

If it were made from a thin sheet of anodized aluminium, I'd kinda understand because you'd be adding a thermal conductor with good convection properties.

[Image: siggy.jpg]

  Reply
#5
(08-08-2019, 05:18 AM)1sostatic Wrote:   the whole point of a radiator is to radiate heat. When you are stood in traffic and the rush of air has gone...
Usually it's used in 73 models where there is this huge (bit ugly) gap between grille and rad support. My 71 (and yours) have the grille going deep, practically same depth as this cover. No need for a cover for 71, at least with the deep grille (and hood locks).

The radiator is on the other side of the support and there is first a gap in between of say 4 cm/2 inches then its the front side of the radiator. Plenty for hot air to escape.

As about the above piece. it will flap up/down, unless you'd use...  double sided tape, which I believe is provided with this part.
Considering how thin a 73 grill is on top, not sure I'd like that. There are few threads on this cover thingy...

For my own, made decades ago, after a grille update a few weeks back, I went for rivnuts. So it's adding strength to the grille and prevents it moves or vibrate and its now even more easy/faster to remove it than before. In my view, a 73 bay looks nicer with a cover than without.

Reminds me I still need to find SS M6 30 with alen heads...


[Image: cover73.jpg]

73 modified Grandé 351C. Almost done. 
71 429CJ. In progress
  Reply
#6
(08-08-2019, 07:31 AM)Fabrice Wrote:
(08-08-2019, 05:18 AM)1sostatic Wrote:   the whole point of a radiator is to radiate heat. When you are stood in traffic and the rush of air has gone...
Usually it's used in 73 models where there is this huge (bit ugly) gap between grille and rad support. My 71 (and yours) have the grille going deep, practically same depth as this cover. No need for a cover for 71, at least with the deep grille (and hood locks).

The radiator is on the other side of the support and there is first a gap in between of say 4 cm/2 inches then its the front side of the radiator. Plenty for hot air to escape.

As about the above piece. it will flap up/down, unless you'd use...  double sided tape, which I believe is provided with this part.
Considering how thin a 73 grill is on top, not sure I'd like that. There are few threads on this cover thingy...

For my own, made decades ago, after a grille update a few weeks back, I went for rivnuts. So it's adding strength to the grille and prevents it moves or vibrate and its now even more easy/faster to remove it than before. In my view, a 73 bay looks nicer with a cover than without.

Reminds me I still need to find SS M6 30 with alen heads...


[Image: cover73.jpg]




This looks really good. I'm going to continue researching. Thank you.
  Reply
Share Thread:  


Possibly Related Threads…
Thread Author Replies Views Last Post
  Radiator to grill cover mpbsr 21 1,436 10-29-2018, 08:05 PM
Last Post: CoolCat33
  Grille adjustment DerAlte 3 460 08-24-2018, 12:11 AM
Last Post: DerAlte
runninpony Radiator Upper/Lower Brackets NOT A T5 3 578 05-27-2018, 07:58 AM
Last Post: NOT A T5
  Mach 1 grille 71_resurrection 1 663 05-08-2018, 01:17 PM
Last Post: secluff
runninpony Dash Speaker Grille/Bracket NOT A T5 8 1,056 05-04-2018, 06:19 AM
Last Post: NOT A T5
  Boot Cover JohnnyJ 2 523 03-26-2018, 07:43 AM
Last Post: JohnnyJ
  Plastic Pieces - Honeycomb grille, panel, fan shroud, etc. ITMike5.0 14 1,591 02-04-2018, 03:05 PM
Last Post: Carolina_Mountain_Mustangs
  Radiator air deflector JD79 37 3,758 02-04-2018, 01:17 AM
Last Post: JD79



Users browsing this thread: 1 Guest(s)