• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Quarter window molding tape
Looking to find a source for the rubber window glass tape to replace the stainless molding on the front of the quarter window glass.  Ford part ESB-M3044-A.

Also, is there a tutorial on installing the drip rail and window seal trim pieces?  Ford body manual doesn't have a good description and doesn't mention where to use the foam seal.  Is there foam seal between the drip rail and the body?  And what about between the drip rail and the window seal trim?


1969 Acapulco Blue Convertible
     408C CJ, 5 Spd
1973 Lava Red Mach 1
     Being restored - 351C, 4V, AOD
I just replaced mine and didn't use any tape on the glass - the mould and the chrome strip hold it in place very tightly ( had to use a rubber mallet to seat it all the way home).

Don't use the foam seal unless you want it to leak, There are plenty of threads here about the drip rail install and sealing if you do a search. Some people use a butyl type of tape (can't remember the name) and some have use sikaflex sealant. Sikaflex do a specific sealant for automotive glass - forget the number but that is what I used and it has worked fine.



73 Mach 1
Share Thread:  

Possibly Related Threads…
Thread Author Replies Views Last Post
  Is this for the window washer system Ballaratcastle 18 757 03-04-2019, 10:02 PM
Last Post: Ballaratcastle
  window felts with chrome trim?? rjpohl 3 382 01-04-2019, 08:30 AM
Last Post: OMS
  fastback quarter windows adjustable ? Nige 6 472 11-14-2018, 09:43 AM
Last Post: Carolina_Mountain_Mustangs
  Fastback Rear Window Install andy72 8 1,432 11-09-2018, 12:03 PM
Last Post: Carolina_Mountain_Mustangs
  Grease for Door Window Hardware and Sliders andy72 7 1,024 10-31-2018, 09:03 AM
Last Post: Carolina_Mountain_Mustangs
runninpony Quarter window L bracket cage nuts NOT A T5 4 399 09-20-2018, 06:22 AM
Last Post: NOT A T5
runninpony Convertible 1/4 window washers and hardware NOT A T5 4 465 09-17-2018, 12:07 PM
Last Post: NOT A T5
  Quarter Window leaking...... AndrewBeng 1 496 09-14-2018, 12:13 PM
Last Post: eddyw

Users browsing this thread: 1 Guest(s)