• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Proper installing of the side stripes
#1
Hello Folks,

after repainting some parts of the body of my Mach1 I have to reinstall the side stripes.

What will be the proper way to do this?

Thanks for your help.

Oskar

"If you can leave two black stripes from the exit of one corner to the braking zone of the next, you have enough horsepower."

Mark Donohue (*1937 †1975)
  Reply
#2
The 429 Mega site has a lot of great details on this. Here is the link: http://429mustangcougarinfo.50megs.com/paint_info.htm
  Reply
#3
OLE PONY;85495 Wrote:The 429 Mega site has a lot of great details on this. Here is the link: http://429mustangcougarinfo.50megs.com/paint_info.htm

Thanks Mike,

it shows the proper position but not how to install it, for example, how to bring the stripes bubble free on to the chassis and where is the best place to begin, or any tricks what make it easier to bring it on.

Oskar

"If you can leave two black stripes from the exit of one corner to the braking zone of the next, you have enough horsepower."

Mark Donohue (*1937 †1975)
  Reply
#4
mix some soapy water up and use a spray bottle get the side wet and the stripes use a plastic squeege to pull out air bubbles.
  Reply
#5
These are the instructions that came with my stripes from Graphic Express:

http://www.graphic-express.com/PDF/00-instructions.pdf
  Reply
#6
gpierce;85561 Wrote:These are the instructions that came with my stripes from Graphic Express:

http://www.graphic-express.com/PDF/00-instructions.pdf

Thanks,
thats what I was looking for.
I have the stripes from 3M, but I think it will be the same handling.

"If you can leave two black stripes from the exit of one corner to the braking zone of the next, you have enough horsepower."

Mark Donohue (*1937 †1975)
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Installing different seats? scgamecock 3 289 04-18-2018, 07:47 PM
Last Post: mach1000
  Installing long console in non console Mach 1? scgamecock 9 483 02-03-2018, 09:52 AM
Last Post: Carolina_Mountain_Mustangs
  Correct Stripes for a 73 Mach 1 pschafer 13 1,171 10-16-2017, 04:28 PM
Last Post: Carolina_Mountain_Mustangs
runninpony Front Side Marker Light NOT A T5 2 427 08-05-2017, 04:09 AM
Last Post: NOT A T5
runninpony Front RH Side Marker Light NOT A T5 2 463 07-31-2017, 04:45 AM
Last Post: NOT A T5
runninpony WTB Side Marker Lights NOT A T5 4 669 06-11-2017, 10:18 AM
Last Post: NOT A T5
  Side view mirror waterlife 0 501 05-22-2017, 04:05 PM
Last Post: waterlife
  Proper rear panel placement Jeff73Mach1 0 355 03-01-2017, 01:11 PM
Last Post: Jeff73Mach1



Users browsing this thread: 1 Guest(s)