• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Primed Engine
#1
Pulled Dist and valve covers back off, and hooked up oil pressure gauge to engine. Ran drill to oil pump and got 65-70 PSI and ran till oil came up through all push rods. Made appointment with my oldest son to help me install on Sat. and running by Sun. Tongue

Alan L

[Image: 1_30_09_13_10_12_32.png]
Alan L
  Reply
#2
Good get it going...

[Image: 20r9ylt.jpg]
  Reply
#3
Can't wait to hear the good news this weekend.



Mike AKA Ole Pony & Rare Pony

Our current Mustang garage/driveway
1973 Mustang Convert - Bought in 1974 - Still have it!
2004 Mach 1 Oxford White Auto, Bought Sept 06


[Image: 20180127_082009.jpg]

upload a photo on internet




  Reply
#4
Cool Alan, It'll be good to hear it run. Building your own engine is very rewarding.

Jeff T.

Low buck, touring style, '73 Convertible "rolling restoration", 351c, 2v heads with a shave and a haircut, Performer intake, Holley 650(ish), roller rockers, screw in studs, guideplates, stainless valves, Duraspark / Motorsports MSD, T-5 conversion. 1-1/8" front, 3/4" rear swaybars KYB shocks and some home brewed subframe connectors. Future plans; JGC steering box, Cobra brakes and... paint, interior, etc.

When I die I want to die like grandpa, peacefully in my sleep... not screaming, like his passenger.

[Image: 1_12_09_14_10_15_11.png]
  Reply
#5
goodjob way to go hope your nerves hold up better than mine.
  Reply
#6
Dang! You are definitely in 4th gear, Alan! Still waiting for the main bearings and cleaning everything for the third or fourth time....

Doc

Doc

[Image: 6y14ea.jpg]

Project started 8-7-10
Completed: All new suspension, rebuilt 351C H Code bored .030 over with mild cam and intake, new 3.50 TracLok, custom exhaust system
Current "mini-project": interior upgrade Undecided
  Reply
#7
Can't wait to hear you have it running. Still waiting for my block to get back fom the machine shop.
Jim

drive it like you stole it
  Reply
#8
The weekend is here. Good luck Alan!
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  pull engine and trans as a unit? scgamecock 46 840 11-28-2018, 02:36 PM
Last Post: Fabrice
  engine oil Driven HR1 15W50 Nige 10 285 11-27-2018, 02:41 PM
Last Post: Fabrice
  A little engine part porn for Tuesday Hemikiller 17 445 11-21-2018, 09:40 AM
Last Post: 73pony
  engine build advice kusanagi 16 884 11-21-2018, 02:17 AM
Last Post: Robsweden
  351 Cleveland engine parts and worth 501MACH1 11 569 10-17-2018, 09:38 AM
Last Post: Carolina_Mountain_Mustangs
  Need suggestions based on engine build/setup 73' mach 1 11 528 10-04-2018, 12:24 PM
Last Post: 73' mach 1
  ENGINE DISPLACEMENT PAPPY HAROLD 1 214 09-30-2018, 06:34 PM
Last Post: OzCoupe72
  A Peculiar Engine Swap Studdley 25 728 09-25-2018, 06:35 PM
Last Post: Stanglover



Users browsing this thread: 1 Guest(s)