• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
plastic fender to cowl filler panel trim information
#1
Anyone have part numbers or any information on the black plastic fender to cowl filler panel trim pieces? Its attaches to the upper inner edge of the fender where the fender meets the A pillar and cowl. Part number? Are they interchangeable with the cougar? I have one from a cougar but I don't have one from a Mustang to match it up. The Cougar one does not have a part number on it. Did Ford only use them in 71? Anything else?
  Reply
#2
(03-12-2018, 01:40 PM)mach1000 Wrote: Anyone have part numbers or any information on the black plastic fender to cowl filler panel trim pieces? Its attaches to the upper inner edge of the fender where the fender meets the A pillar and cowl. Part number? Are they interchangeable with the cougar? I have one from a cougar but I don't have one from a Mustang to match it up. The Cougar one does not have a part number on it. Did Ford only use them in 71? Anything else?


We’ve had this discussion before bc mine came with the but were misplaced during the build. I believe Don told me it was discontinued after 71. Would love to find them to finish my build.




Sent from my iPhone using Tapatalk
  Reply
#3
(03-12-2018, 02:52 PM)jeremycfr Wrote:
(03-12-2018, 01:40 PM)mach1000 Wrote: Anyone have part numbers or any information on the black plastic fender to cowl filler panel trim pieces? Its attaches to the upper inner edge of the fender where the fender meets the A pillar and cowl. Part number? Are they interchangeable with the cougar? I have one from a cougar but I don't have one from a Mustang to match it up. The Cougar one does not have a part number on it. Did Ford only use them in 71? Anything else?


We’ve had this discussion before bc mine came with the but were misplaced during the build. I believe Don told me it was discontinued after 71. Would love to find them to finish my build.




Sent from my iPhone using Tapatalk

I am a bit unclear about which part you are referring to. 

Is this what you need the number for?


[Image: 20170308_082007_1.jpg]

1973 H Code Convertible - Medium Copper Metallic - June 8, 1973, Built Ford Marketing Sales Vehicle
[Image: DSC_0266xsm.jpg]
[Image: satellite.png] Proud Space Junk Award Winner!












  Reply
#4
mach1000, if referring to the shield as shown in rackerm's illustration, that is the fender splash shield. They are different on the Cougar. Right rear is D1ZZ-16102-B (ID# D1ZB-16B568-AA,AC) Left rear is D1ZZ-16103-B (D1ZB-16B569-AA,AC).
There was also a small plastic piece at the upper rear of the fender Ford called a "Front Fender Filler". They were only installed in production up to 6/1/71, after that date they were no longer used. The 71 Cougar also used the same piece, but they can be a difficult find since a lot of them have deteriorated over time, and were not installed for the entire production run.  Part number for the right side is D1ZZ-16570-A (ID# D1ZB-16570-AA,AB,AE) Left side D1ZZ-16571-A (ID# D1ZB-16571-AA,AB,AE).
If this is not what you are looking for just let us know and I'm sure one of us can come up with something!


Attached Files
.jpg   16570-1_LI.jpg (Size: 992.34 KB / Downloads: 85)

Steve

No Officer...I really don't know how fast I was going, my speedometer stopped at 140!
  Reply
#5
(03-12-2018, 09:39 PM)secluff Wrote: mach1000, if referring to the shield as shown in rackerm's illustration, that is the fender splash shield. They are different on the Cougar. Right rear is D1ZZ-16102-B (ID# D1ZB-16B568-AA,AC) Left rear is D1ZZ-16103-B (D1ZB-16B569-AA,AC).
There was also a small plastic piece at the upper rear of the fender Ford called a "Front Fender Filler". They were only installed in production up to 6/1/71, after that date they were no longer used. The 71 Cougar also used the same piece, but they can be a difficult find since a lot of them have deteriorated over time, and were not installed for the entire production run.  Part number for the right side is D1ZZ-16570-A (ID# D1ZB-16570-AA,AB,AE) Left side D1ZZ-16571-A (ID# D1ZB-16571-AA,AB,AE).
If this is not what you are looking for just let us know and I'm sure one of us can come up with something!


We’re on the same page. You can see it in my tear down photo. Somehow they were missing after I put the car back together.

[Image: 7a794535ba7fe3a8470aeb6ee666a4bf.jpg]


Sent from my iPhone using Tapatalk
  Reply
#6
(03-12-2018, 01:40 PM)mach1000 Wrote: Anyone have part numbers or any information on the black plastic fender to cowl filler panel trim pieces? Its attaches to the upper inner edge of the fender where the fender meets the A pillar and cowl. Part number? Are they interchangeable with the cougar? I have one from a cougar but I don't have one from a Mustang to match it up. The Cougar one does not have a part number on it. Did Ford only use them in 71? Anything else?

Do you mean this part?:


Attached Files Thumbnail(s)
   
  Reply
#7
(03-13-2018, 07:57 AM)eddyw Wrote:
(03-12-2018, 01:40 PM)mach1000 Wrote: Anyone have part numbers or any information on the black plastic fender to cowl filler panel trim pieces? Its attaches to the upper inner edge of the fender where the fender meets the A pillar and cowl. Part number? Are they interchangeable with the cougar? I have one from a cougar but I don't have one from a Mustang to match it up. The Cougar one does not have a part number on it. Did Ford only use them in 71? Anything else?

Do you mean this part?:

I was not referring to the splash shields. Those are pretty easy to come by and have the part number on them.

The part eddyw included is what Im referring to. It fits onto the underside of the rear of the upper fender where the top lip meets the cowl area. Thanks for the information so far. Any other info that anyone has would be appreciated.
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Tail light panel honeycomb fasteners. turtle5353 23 2,248 06-03-2018, 09:07 PM
Last Post: Boss1Ray
  Mach 1 Lower outside door trim/molding question Monterey 2 173 05-25-2018, 03:39 PM
Last Post: Mister 4x4
  Taillight PANEL CENTER BRACE MOUNT vintageman 6 356 04-26-2018, 08:25 PM
Last Post: vintageman
  My method for cowl repair tony-muscle 14 801 02-28-2018, 10:39 AM
Last Post: tony-muscle
  Firewall Cowl Molding rocketfoot 9 512 02-15-2018, 06:07 PM
Last Post: rocketfoot
  Partial Quarter Panel rotorr22 7 603 02-10-2018, 12:16 AM
Last Post: rotorr22
  Any pics of windshield trim clips and how to remove? vikingsandpintos 4 365 02-06-2018, 11:39 PM
Last Post: rotorr22
  1971 MUSTANG DYNACORN FULL QUARTER PANEL INSTALL aypsears 10 2,486 01-03-2018, 01:24 AM
Last Post: 302429c



Users browsing this thread: 1 Guest(s)