• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
pinion yoke
#1
Hello folks, my pinion yoke appears to be bent causing a bit of driveshaft wobble. This is for the ford 9" in our stang. Do any of you kind folks know what spline count and type I need? A link to where I could get one would be super helpful.

Thanks

351w - Ford racing GT40X 178 cc aluminum heads - Ford racing(crane) 1.7 roller rockers - Comp Cams 280H magnum cam .544" / .544" lift - ARP hardware - hedman longtubes - magnaflow exhaust with X pipe - Duraspark - MSD digital 6al box - MSD TFI coil - optima red top battery - tuff stuff 140 amp alternator - weiand stealth intake  - edelbrock 1406 600 carb  - march pullies and brackets - Be cool fan controller - derale electric fan - FMX trans - motive 4.11 gears - traction lok - lakewood traction bars.                                            










  Reply
#2
This link should get you started. http://www.dennysdriveshaft.com/c58_ford_9_inch.html
Measure everything twice. Chuck
  Reply
#3
I have had good service from these guys and they are more or less in your neck of the woods.

http://www.quickperformance.com/Ford-9-I..._c_37.html

73 conv. 460, D0VE large valve heads, Performer RPM manifold, Voodoo 227/233 cam, Holley 950 HP carb, C6 trans, 3.25 trak-loc.
  Reply
#4
Thanks Tommy for saving me some money, I will order through them::thumb

351w - Ford racing GT40X 178 cc aluminum heads - Ford racing(crane) 1.7 roller rockers - Comp Cams 280H magnum cam .544" / .544" lift - ARP hardware - hedman longtubes - magnaflow exhaust with X pipe - Duraspark - MSD digital 6al box - MSD TFI coil - optima red top battery - tuff stuff 140 amp alternator - weiand stealth intake  - edelbrock 1406 600 carb  - march pullies and brackets - Be cool fan controller - derale electric fan - FMX trans - motive 4.11 gears - traction lok - lakewood traction bars.                                            










  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  2015 Mustang Rack and Pinion unit Jeff73Mach1 2 154 04-08-2019, 02:47 PM
Last Post: Jeff73Mach1
  Installing Rack & Pinion Steering into a 1973 Mustang mustang7173 4 1,196 08-22-2016, 09:43 AM
Last Post: Jeff73Mach1
  Unisteer rack and pinion coming soon perhaps? mach1000 2 798 07-19-2014, 06:12 PM
Last Post: cazsper
  Rack and pinion? cazsper 4 891 07-19-2014, 02:11 PM
Last Post: Ron Tanzi
  rack and pinion steering coilwire 1 910 06-05-2013, 12:21 AM
Last Post: gpierce
  pinion play dually 5 1,197 12-10-2012, 09:06 PM
Last Post: Don C



Users browsing this thread: 1 Guest(s)