• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Part to install back fold down seats
#1
    Need the piece in this pic that the back seat rests against and screws to
  Reply
#2
That is a bit ambigous. Which part?

Trap Door
1/4 interior panels
rear interior panels
floor filler for folded seat to rest on

We need a little more direction please.

   
   

BKDunha
72 Mach 1 H-Code (Concourse driven restoration)
67 S-Code Factory GT with 4-Spd

68 Mercury Cyclone (Pro-Street project)
  Reply
#3
bkdunha;161071 Wrote:That is a bit ambigous. Which part?

Trap Door
1/4 interior panels
rear interior panels
floor filler for folded seat to rest on

We need a little more direction please.

Sorry for any miss understanding the metal rail at bottom. have side pieces.thanks
  Reply
#4
mach 1 marc;161074 Wrote:
bkdunha;161071 Wrote:That is a bit ambigous. Which part?

Trap Door
1/4 interior panels
rear interior panels
floor filler for folded seat to rest on

We need a little more direction please.

Sorry for any miss understanding the metal rail at bottom. have side pieces.thanks

Huh


OK I'm still lost (as usual) Big Grin

Can you get a better pic or circle the piece you need in your pic?

Thanks,

Ray

1971 Boss 351  
1972 Q code 4 speed convertible 
1971 Mustang Sportsroof  351-2V FMX 
1973 Mach 1 (parts car)
  Reply
#5
Boss1Ray;161075 Wrote:
mach 1 marc;161074 Wrote:
bkdunha;161071 Wrote:That is a bit ambigous. Which part?

Trap Door
1/4 interior panels
rear interior panels
floor filler for folded seat to rest on

We need a little more direction please.

Sorry for any miss understanding the metal rail at bottom. have side pieces.thanks

Huh


OK I'm still lost (as usual) Big Grin

Can you get a better pic or circle the piece you need in your pic?

Thanks,

Ray
the metal rail in this pic


Attached Files Thumbnail(s)
   
  Reply
#6
I may have one at the garage, will check this weekend. Mike


mach 1 marc;161084 Wrote:
Boss1Ray;161075 Wrote:
mach 1 marc;161074 Wrote:Sorry for any miss understanding the metal rail at bottom. have side pieces.thanks

Huh


OK I'm still lost (as usual) Big Grin

Can you get a better pic or circle the piece you need in your pic?

Thanks,

Ray
the metal rail in this pic

Thanks from MotorCity Mustang!
http://stores.ebay.com/MotorCity-Mustang
  Reply
#7
Motorcity Mustang;161096 Wrote:I may have one at the garage, will check this weekend. Mike


mach 1 marc;161084 Wrote:
Boss1Ray;161075 Wrote:Huh


OK I'm still lost (as usual) Big Grin

Can you get a better pic or circle the piece you need in your pic?

Thanks,

Ray
the metal rail in this pic

thanks
  Reply
#8
Marc, I did find that metal rail this afternoon. Take a look at the pictures and make sure that is what you need. Mike




mach 1 marc;161101 Wrote:
Motorcity Mustang;161096 Wrote:I may have one at the garage, will check this weekend. Mike


mach 1 marc;161084 Wrote:the metal rail in this pic

thanks

Marc, The first picture looks really rusty, but it is all surface rust, no rust though. Mike

Motorcity Mustang;161613 Wrote:Marc, I did find that metal rail this afternoon. Take a look at the pictures and make sure that is what you need. Mike




mach 1 marc;161101 Wrote:
Motorcity Mustang;161096 Wrote:I may have one at the garage, will check this weekend. Mike

thanks


Attached Files Thumbnail(s)
       

Thanks from MotorCity Mustang!
http://stores.ebay.com/MotorCity-Mustang
  Reply
#9
Motorcity Mustang;161613 Wrote:Marc, I did find that metal rail this afternoon. Take a look at the pictures and make sure that is what you need. Mike




mach 1 marc;161101 Wrote:
Motorcity Mustang;161096 Wrote:I may have one at the garage, will check this weekend. Mike

thanks

Marc, The first picture looks really rusty, but it is all surface rust, no rust though. Mike

Motorcity Mustang;161613 Wrote:Marc, I did find that metal rail this afternoon. Take a look at the pictures and make sure that is what you need. Mike




mach 1 marc;161101 Wrote:thanks
That be the one .. Pretty cool good job. i will be going to the shop tomorrow and i will let you know ... Hold it for me Thanks Marc..

Motorcity Mustang;161613 Wrote:Marc, I did find that metal rail this afternoon. Take a look at the pictures and make sure that is what you need. Mike




mach 1 marc;161101 Wrote:
Motorcity Mustang;161096 Wrote:I may have one at the garage, will check this weekend. Mike

thanks

Marc, The first picture looks really rusty, but it is all surface rust, no rust though. Mike

Motorcity Mustang;161613 Wrote:Marc, I did find that metal rail this afternoon. Take a look at the pictures and make sure that is what you need. Mike




mach 1 marc;161101 Wrote:thanks
That be the one .. Pretty cool good job. i will be going to the shop tomorrow and i will let you know ... Hold it for me Thanks Marc..

mach 1 marc;161753 Wrote:
Motorcity Mustang;161613 Wrote:Marc, I did find that metal rail this afternoon. Take a look at the pictures and make sure that is what you need. Mike




mach 1 marc;161101 Wrote:thanks

Marc, The first picture looks really rusty, but it is all surface rust, no rust though. Mike

Motorcity Mustang;161613 Wrote:Marc, I did find that metal rail this afternoon. Take a look at the pictures and make sure that is what you need. Mike
That be the one .. Pretty cool good job. i will be going to the shop tomorrow and i will let you know ... Hold it for me Thanks Marc..

Motorcity Mustang;161613 Wrote:Marc, I did find that metal rail this afternoon. Take a look at the pictures and make sure that is what you need. Mike




mach 1 marc;161101 Wrote:thanks

Marc, The first picture looks really rusty, but it is all surface rust, no rust though. Mike

Motorcity Mustang;161613 Wrote:Marc, I did find that metal rail this afternoon. Take a look at the pictures and make sure that is what you need. Mike
That be the one .. Pretty cool good job. i will be going to the shop tomorrow and i will let you know ... Hold it for me Thanks Marc..
Mike , Cost and measurement please .. Thanks
  Reply
#10
Marc, Sorry for the delay, just got back in the country late last night. Will measure it up and reply shortly. Mike

mach 1 marc;161753 Wrote:[quote=Motorcity Mustang;161613]
Marc, I did find that metal rail this afternoon. Take a look at the pictures and make sure that is what you need. Mike
That be the one .. Pretty cool good job. i will be going to the shop tomorrow and i will let you know ... Hold it for me Thanks Marc..

though. Mike

[

Thanks from MotorCity Mustang!
http://stores.ebay.com/MotorCity-Mustang
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  WTB Rear Seats Interior Quarter Trim Panels Sunviser Brackets AdaMzWD 5 270 08-04-2018, 08:03 PM
Last Post: OMS
  [WTB] 71-72 fast back rear quarter extensions raceman408 2 290 05-18-2018, 05:46 PM
Last Post: kcmash
  Wtb fold down seat panels Coupelx 2 409 02-12-2018, 10:20 PM
Last Post: 87fox72mach
  Mach1 Seats 72460CJVert 2 458 08-17-2017, 10:18 AM
Last Post: street rod mach 1
  Looking for some Foxbody seats 73pony 0 425 06-20-2017, 07:53 AM
Last Post: 73pony
  [WTB] looking for rear most fold down seat panels mwilson7 10 953 12-29-2016, 06:47 AM
Last Post: Mikes73
  [WTB] white comfortweave front seats John J 2 487 10-05-2016, 10:04 AM
Last Post: mach1000
  Need a Cleveland part 6972boss 4 751 09-22-2016, 12:12 PM
Last Post: Don C



Users browsing this thread: 1 Guest(s)