• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Part revision from 71 to 72
#1
Today I pulled out my original 71 shock tower covers and a set pulled of a 72 Grandé.  While inspecting them to see which set I will restore I notice the 72 covers have been updated. First look the 72 covers have more dense square bump stops. The 72 driver side cover is complete new part with 4 ribs in the cover over the 71s 3 ribs. It also has flat stock added to the shock tower mounting surface. Both 72 covers have a updated reinforcement on the backside for the bump stops. The 72 passenger side cover seems to be the same part with the updated bump stop reinforcement. Looking at my original 71 driver side cover I can see why Ford had to revise the cover. It was bent from bottoming out.  So my guess with the extra weight on the drivers side caused the car to bottom out hard.


Attached Files Thumbnail(s)
                               

- Mike
  Reply
Share Thread:  


Possibly Related Threads…
Thread Author Replies Views Last Post
  What’s This Part? spikhead 7 313 08-10-2019, 12:45 PM
Last Post: vintageman
  71 fuel tank part locatio Rayzo63 2 182 06-30-2019, 06:09 PM
Last Post: Stanglover
  Need help identifying another part slowpoke17 2 336 05-08-2019, 11:13 AM
Last Post: Carolina_Mountain_Mustangs
  1971 429cj vacuum adjustable advance part? Anderslober 24 2,032 05-22-2018, 05:17 PM
Last Post: Carolina_Mountain_Mustangs
  71 conv 302 2V unknown small plastics part 1971V8 3 937 02-07-2018, 09:07 AM
Last Post: Carolina_Mountain_Mustangs
  Name That Part....Please!!! jeff8877 3 787 07-24-2017, 10:40 PM
Last Post: Carolina_Mountain_Mustangs
  Name That Part! Three Ponies 6 1,119 07-13-2017, 07:50 PM
Last Post: Three Ponies
  1973 Mustang Production Info - Part 2 (Options) Steve73QMach1 11 1,559 04-25-2016, 08:06 AM
Last Post: Bill73Ragtop



Users browsing this thread: 1 Guest(s)