• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Part name and where to buy
#1
I have tried NPD, CJ Pony, Macs and Ohio Mustang and cannot find what i am looking for. I have gone through the air cleaner section and still no joy.
I am looking for the rubber grommet that fits in the side of the air cleaner and also the rubber pipe and the bit at the other end of the pipe. Circled in picture

I am also looking for the plastic piece that fits on the end


Attached Files Thumbnail(s)
   

Steve
1971 Grandé
  Reply
#2
Silver part is "inlet snorkel vacuum motor. Rubber line is just vacuum hose. You also appear to be missing the heat riser tube from exhaust manifold that attaches just under the vacuum motor.

'73 Grandé H Code. Headman long tube headers, T-5 Transmission, 3.70 Traclok, Lowered 1" all around, Aussie 2v heads w/ 2.19 intake, 1.71 exhaust, screw in studs, full roller cam 608/612 lift 280/281 duration LSA 112, Quick Fuel 750 CFM double pumper, AirGap intake.

'73 F code convertible. Bright red. Needs total restore. (IE HOT MESS)

- Jason
  Reply
#3
See the attached vacuum diagram and photo of my car if it will help.

   
   
   

BKDunha
72 Mach 1 H-Code (Concourse driven restoration)
67 S-Code Factory GT with 4-Spd

68 Mercury Cyclone (Pro-Street project)
  Reply
#4
And whats this bit that goes into the rear left. Mine has a hose around 5 inches long and where it fits into the air cleaner housing the rubber has hardened


Attached Files Thumbnail(s)
   

Steve
1971 Grandé
  Reply
#5
Steve - that hose and related fitting on breather base assembly is for the PCV (positive crankcase ventilation) tube.


.jpg   pcv .JPG (Size: 21.73 KB / Downloads: 164)

Here is one a later model 302 Ford engine:


.jpg   pcv later model engine.JPG (Size: 33.67 KB / Downloads: 164)




Ray


Attached Files
.jpg   pcv 351 2v.JPG (Size: 25.07 KB / Downloads: 151)

1971 Boss 351  
1972 Q code 4 speed convertible 
1971 Mustang Sportsroof  351-2V FMX 
1973 Mach 1 (parts car)
  Reply
#6
Thanks everyone for your help with identification. If anyone knows where i can purchase what i am looking for can you please post a link. Thank You

Steve
1971 Grandé
  Reply
#7
http://www2.cougarpartscatalog.com/100022628.html - preheater hose

Not having much luck on the vacuum motor. I will take a look at mine tonight and see if it is functional. It will be date coded '73 if there is a date code on it. I will take some pics and let you know if it works. If it does I will send it to you for the cost of shipping.

'73 Grandé H Code. Headman long tube headers, T-5 Transmission, 3.70 Traclok, Lowered 1" all around, Aussie 2v heads w/ 2.19 intake, 1.71 exhaust, screw in studs, full roller cam 608/612 lift 280/281 duration LSA 112, Quick Fuel 750 CFM double pumper, AirGap intake.

'73 F code convertible. Bright red. Needs total restore. (IE HOT MESS)

- Jason
  Reply
#8
Well unfortunately the vac diaphragm in mine is shot. Tried to suck air through vac hose to test and just got air and no movement of the flapper.

'73 Grandé H Code. Headman long tube headers, T-5 Transmission, 3.70 Traclok, Lowered 1" all around, Aussie 2v heads w/ 2.19 intake, 1.71 exhaust, screw in studs, full roller cam 608/612 lift 280/281 duration LSA 112, Quick Fuel 750 CFM double pumper, AirGap intake.

'73 F code convertible. Bright red. Needs total restore. (IE HOT MESS)

- Jason
  Reply
#9
73pony;282685 Wrote:Well unfortunately the vac diaphragm in mine is shot. Tried to suck air through vac hose to test and just got air and no movement of the flapper.

Thank You for link and your effort

Steve
1971 Grandé
  Reply
#10
You might try calling west coast classic cougar and see I they have a vac motor.

'73 Grandé H Code. Headman long tube headers, T-5 Transmission, 3.70 Traclok, Lowered 1" all around, Aussie 2v heads w/ 2.19 intake, 1.71 exhaust, screw in studs, full roller cam 608/612 lift 280/281 duration LSA 112, Quick Fuel 750 CFM double pumper, AirGap intake.

'73 F code convertible. Bright red. Needs total restore. (IE HOT MESS)

- Jason
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
runninpony Can you identify this part please Ballaratcastle 8 385 10-20-2018, 03:19 PM
Last Post: Ballaratcastle
  Part name door rod retainers Pegleg 1 268 07-25-2018, 07:29 AM
Last Post: Hemikiller
  Part number required Pegleg 1 263 07-19-2018, 09:31 AM
Last Post: secluff
  Where can I buy these nuts? Fabrice 4 383 07-16-2018, 10:12 AM
Last Post: OMS
  Are the seat rubbers available to buy new Pegleg 6 365 06-11-2018, 12:52 PM
Last Post: Pegleg
  Where to buy Instrument Cluster Circuit Board With Tachometer 1971-1973 scgamecock 4 696 03-04-2018, 04:08 PM
Last Post: nailpounder
  Info to Replacement-Part Air-Intake-Hose Duck 6 1,127 10-25-2017, 03:26 PM
Last Post: Stanglover
  New gas tank part 2 eventhorizon 4 693 09-04-2017, 07:33 AM
Last Post: delawarebill



Users browsing this thread: 1 Guest(s)