• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
P/S Pump Mounting
#1
I just finished bending a new fuel line from the pump to carb. Looks good too. Not sure if will clear fuel filter, so can someone shut me a pic of the P/S pump from top and back to see if it will clear.


Alan L


Attached Files Thumbnail(s)
   

[Image: 1_30_09_13_10_12_32.png]
Alan L
  Reply
#2
Does not appear it will clear. I got no pics but from the block to the PS pump is approx 1.75" gap.

Edit: Personally, I do better with pics, so I took some for you Big Grin
[Image: 1znbic6.jpg]
[Image: 2z4z1mp.jpg]

Hope these help!
DJ
  Reply
#3
Thanks... Looks real tight

[Image: 1_30_09_13_10_12_32.png]
Alan L
  Reply
#4
not2old;19694 Wrote:Thanks... Looks real tight

Your reply should;ve been "Opps, I cut the line in the wrong place. F#$#$ #$#$ #$#$#!" Sorry, had to go there. Angel Still can fix with a thinner filter, but maintenance to that filter will be a little more challenging than if you had the filter horizontal near the carb.
Edit: Just realized you made your own line so no bigggie there. Just try to keep the filter near the carb inlet or above where you can easily get to it for maintenance. Also wanna keep it away from heat and that area gets very hot so not a good place.
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  what water pump and questions sdstang 6 208 03-25-2019, 08:24 PM
Last Post: Hemikiller
  Power Steering Pump needs replacing 1972 andy72 8 315 02-22-2019, 11:52 PM
Last Post: Bentworker
runninpony Power Top Pump NOT A T5 6 340 11-25-2018, 04:22 PM
Last Post: NOT A T5
  351C Water Pump Install Question andy72 6 560 11-24-2018, 10:38 AM
Last Post: andy72
Stang Water pump replacement Plywood50 8 823 05-23-2018, 10:27 PM
Last Post: EBSTANG
  Power steering pump ERUPTION! [Update question] Sumit 37 4,856 07-31-2017, 12:46 PM
Last Post: Stanglover
  power steering pump Barrylink 3 660 04-08-2017, 11:01 AM
Last Post: Stanglover
  power steering pump coilwire 0 474 02-15-2017, 09:43 AM
Last Post: coilwire



Users browsing this thread: 1 Guest(s)