• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
P/S pitman arm
#1
Anyone running the repop pitman arms available from Mustangs Unlimited, etc? 

http://www.mustangsunlimited.com/Mustang...eering.axd

If so, how is the quality? I'm putting P/S back in the Mach and while I don't "need" a new pitman arm, I'd like to drop a new one in there "just cuz". I'd much Moog, TRW or McQuay-Norris part, but it appears they are no longer made. Looks like the only ones left are the WSD made parts.

https://www.amazon.com/WSD-K8271-Pitman-...pitman+arm


  Reply
#2
I have a Rare Parts RP20148.

Seems nice, the machine work is good, broaching is clean. Wasn’t super stoked with the seal provided but was able to buy a rubber repop that satisfied my OCD.

Figure steering is like brakes... It better work.
  Reply
#3
I got one from OMS. Really nice part with ford logo. Fits perfectly.

run_horse Run Horse Run!
John 72 Q Code
  Reply
#4
I too used the Rare Parts one. Fit well but as stated, the felt seal is not the best. The rubber aftermarket I bought may be the wrong one so I left it off, but used the felt one provided. No issues so far, but on the to-do list for later.
Geoff.
  Reply
Share Thread:  


Possibly Related Threads…
Thread Author Replies Views Last Post
  Dust/Dirt seal on Pitman Arm Post Stanglover 16 2,121 01-20-2019, 08:18 PM
Last Post: Stanglover
runninpony PIT MAN ARM RUBBER SEAL NOT A T5 19 1,534 01-17-2019, 11:52 AM
Last Post: Stanglover
  Replacement PItman Arm Seal BigPinoyHunk 3 1,064 01-15-2019, 07:41 AM
Last Post: GeoBW
  71 Idler Arm w/Power Steering repair or replacement Monterey 10 787 01-09-2019, 07:15 PM
Last Post: Stanglover
  Recommendations on bolts for Idler Arm timachone 3 371 12-31-2018, 03:11 AM
Last Post: timachone
  Moog upper control arm Phisto 14 1,327 06-13-2018, 06:54 PM
Last Post: Danno
  Lower control arm and strut rod bushing help needed vikingsandpintos 5 1,148 12-11-2017, 10:21 AM
Last Post: OMS
  What is up with this upper control arm? vikingsandpintos 7 1,314 12-01-2017, 09:50 AM
Last Post: Hemikiller



Users browsing this thread: 1 Guest(s)