• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Off to Media Blasting
#1
Not much to many, but it's a big deal to me that we finally got the 72 off to the media blaster today. I'm so eager to start welding instead of drilling out welds, grinding, wheeling and sweeping up after her.

New...clean...pics in the garage on Wednesday.

Mark



Attached Files Thumbnail(s)
   
  Reply
#2
72Mike;13583 Wrote:Not much to many, but it's a big deal to me that we finally got the 72 off to the media blaster today. I'm so eager to start welding instead of drilling out welds, grinding, wheeling and sweeping up after her.

New...clean...pics in the garage on Wednesday.

Mark

Wow! Now that is a rebuild! Best of luck, and u guys sure inspire!
  Reply
#3
72Mike;13583 Wrote:Not much to many, but it's a big deal to me that we finally got the 72 off to the media blaster today. I'm so eager to start welding instead of drilling out welds, grinding, wheeling and sweeping up after her.

New...clean...pics in the garage on Wednesday.

Mark

Mike..congrats !!! Nice to see your doing the right thing ! It is a big deal & you should be proud!! I know the feeling ! Been there...& I'm still there Rolleyes But I've only got 1 more structual part to put in, the pass side floor..As always should you need any advice etc..Just post up or email me, again Congrats !!!!!

LOVE OF BEAUTY IS TASTE..THE CREATION OF BEAUTY IS ART
  Reply
#4
looks like your doing a great job there I'm jealous. If only we had a garage that I could work on the car in the winter time, I would take that route also. just don't want to get stuck with a half finished car in the driveway once winter hits. We are planning on either building one or moving to another house with a garage eventually. In the meantime got to make do with what I got.

Eric


[Image: a58hgh.jpg]
DRIVE IT DON'T STORE IT!
  Reply
#5
72fastback;13600 Wrote:looks like your doing a great job there I'm jealous. If only we had a garage that I could work on the car in the winter time, I would take that route also. just don't want to get stuck with a half finished car in the driveway once winter hits. We are planning on either building one or moving to another house with a garage eventually. In the meantime got to make do with what I got.
Eric have you looked into 1 of thesehttp://www.sheltersofnewengland.com/down...0ROUND.pdf
I have the 12 x 20 x 8 from this co for about 11 years now..I've done plenty of work during the winter inside mine & all I use for heat is this http://www.ruralking.com/4-000-18-000-bt...3330313833 18,000 btu's Stay's toasty warm almost too hot..I run it on half after the garage is heated up..What alot of guys do is insulate the inside with dow foamboard (pink or blue) So for about a grand you have a work shop in a box..worked for me for a long time ! Just an option. this co makes the best ones all the other cheap knock offs don't compare.

Scott

LOVE OF BEAUTY IS TASTE..THE CREATION OF BEAUTY IS ART
  Reply
#6
Good deal Mike your moving forward.
  Reply
#7
Wowwwwwwww

1972 Mach 1
Q-Code
Under full restoration

[Image: IMAG0050.jpg]
  Reply
#8
Thanks, guys! Appreciate the support. Scott, I'm especially appreciative of the "bread crumbs" you're leaving along the trail up ahead. Hoping to stay on the path you've blazed.

I'll let you see just how clean she looks tomorrow.

  Reply
#9
Back from blasting and into a light primer coat today. Having a hard time adding these to my garage pics, so I'm posting a couple here.

       
  Reply
#10
72Mike;13831 Wrote:Back from blasting and into a light primer coat today. Having a hard time adding these to my garage pics, so I'm posting a couple here.
Lookin good! Thanks for the pics of the cowl area. I haven't got mine off yet, but your's shows that the only hole that should be there on an A/C car is the passenger side? Thats where mine is rotted, and the A-pillar.
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Need Votes! CJ Pony Parts Social Media contest..Via Facebook or Twitter kindersmach 20 1,902 09-30-2013, 09:45 AM
Last Post: imusa76
  Please Vote, CJ Pony Parts Social Media contest imusa76 20 1,682 09-27-2013, 06:29 AM
Last Post: imusa76
  Mustang in Media Valhallo 1 646 01-03-2013, 04:26 PM
Last Post: mweeps



Users browsing this thread: 1 Guest(s)