• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Odd part needed
#1
I have a 71 mach 1 351c with air

I need the flaps/covers that keep the air in the shroud. They attach to the radiator support. The top and bottom piece go between the condenser and the radiator. They are as long as the radiator.

The side pieces attach to the radiator support and cover the spaces between the support frame and condenser. The drivers side piece covers the AC dryer.

Help me

4 pieces in total
  Reply
#2
Any chance you could dig up a photo? Only because guys like me who don't have air and have NO IDEA what you are describing may see something at the swap meets and boneyards we scavenge from.

[Image: 11jmcuc.png]
351C Bold Manners, Brash Attitude
Favorite Teams: Michigan Wolverines and Whoever Is Playing Ohio State.

When I drive past a herd of cows, the cows MOO at me
  Reply
#3
I'll try. The top piece is in the chiltons service guide between the condenser and radiator... My car is in the shop so I'll have to google it
  Reply
#4
If your building a driver and not a concours show car, you can make them from either a fender dirt seal from another car, or a mud flap from a semi...yeah I know it's not factory but it will cool the condenser
  Reply
#5
caspianwendell;80899 Wrote:If your building a driver and not a concours show car, you can make them from either a fender dirt seal from another car, or a mud flap from a semi...yeah I know it's not factory but it will cool the condenser

What are they called?? I want factory look
  Reply
#6
Radiator air deflector
  Reply
#7
do they make a bottom and sides for the 71?
  Reply
#8
http://www.latemodelrestoration.com/item...Deflectors

Physically these should be very close in overall size, though I doubt the fastening system is the same.

http://www2.cougarpartscatalog.com/d0oz-8349-a.html

or is this what you want?

[Image: 1_01_07_15_8_53_18.png]

"I love my Hookers!" and "Get some Strange" probably have a different connotation to non automotive enthusiasts!
  Reply
#9
71-3's only had the top cover between radiator and core support, for all cars.
I have never seen anything special for A/C car or anything on the sides of the condenser.
Don
  Reply
#10
+1 on Don's post. However, I've been surprised many times as I restored my 72. Post pictures when you can. The top air deflector is also available here. http://macsautoparts.com/campaign_produc...CHL1136558
To my knowledge, no one reproduces the clips that attach the part. I got some used one from Don at OMS. Chuck
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
runninpony Can you identify this part please Ballaratcastle 8 328 10-20-2018, 03:19 PM
Last Post: Ballaratcastle
  Part name door rod retainers Pegleg 1 232 07-25-2018, 07:29 AM
Last Post: Hemikiller
  Part number required Pegleg 1 246 07-19-2018, 09:31 AM
Last Post: secluff
  Info to Replacement-Part Air-Intake-Hose Duck 6 1,084 10-25-2017, 03:26 PM
Last Post: Stanglover
  Antenna replacement help needed please! griffbl 13 1,367 09-11-2017, 09:06 PM
Last Post: SVO2SCJ
  New gas tank part 2 eventhorizon 4 670 09-04-2017, 07:33 AM
Last Post: delawarebill
  A/C Parts Needed for 134a conversion jowens1126 21 1,431 08-14-2017, 06:45 PM
Last Post: rackerm
  Power Windows - Specialist Needed! kcmash 9 1,120 08-08-2017, 10:46 AM
Last Post: Carolina_Mountain_Mustangs



Users browsing this thread: 1 Guest(s)