• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
New Member
#1
newHello, just joined up! Looking forward to being part of the 71-73 Mustang community. 72 Mach 1, 14,000 original miles. Bought 14 years ago with 6900 original miles. Still original red paint. Originally an H code 351 2V with FMX, now modified high performance H code with AOD and suspension mods.


Attached Files Thumbnail(s)
   
#2
welcome from Brisbane, Australia!

Greg.Smile

whistling LORD, MR FORD - JERRY REED
#3
Great looking Mach 1 Bill! Welcome from central Ohio.

Steve
73 Mach 1 Blue Glow/Argent Q Code C6 Auto
73 Mach 1 Blue Glow/Argent Q Code 4 Speed
#4
Welcome to the site from Virginia. Great to hear there are still more some low mileage ones out there. Great picture.
#5
Welcome From Rhode Island.

[Image: 2zem9nk.jpg]
Iyman
1972 Mustang convertible run_horse  
Visit the Mustang Car Club of New England Facebook Page

Visit the Mustang Car Club of New England Web Page

#6
Welcome from northern California.

mike

[Image: 1_11_11_13_11_50_27.png]
#7
Bill Mach 1;163355 Wrote:newHello, just joined up! Looking forward to being part of the 71-73 Mustang community. 72 Mach 1, 14,000 original miles. Bought 14 years ago with 6900 original miles. Still original red paint. Originally an H code 351 2V with FMX, now modified high performance H code with AOD and suspension mods.
sharp! @ how much horsepower from rear wheels? Mine a Q-Code 72 Mustang was rebuilt to @ 350 hp and 9.5:1 compression ratio from the engine w/Holley 650cfm carb before and now w/700 cfm solid body throttle into the Holley "Avenger" MPI EFI further with ram air kit and the K & N dome and base air filter. W/3.5:1 rear axle w/Hurst 4-speed std stick w/wide ratio Ford Toploader w/2.78 in 1st gear and with the Gear Vendors Overdrive = .71:1 in 4th gear, and stock limited slip posi then adding a traction bars and QA1 18 level w/struts on front and Koni Classics on rear. Rate @ 300 rwhp by dyno tune w/289 ft lbs torque. 245 X 60 X 15 X 8" Goodrich T/A radial 15 X8" Magnum 500 in rear and 7" on front w/225 X 15 X 7" Goodrich.

[Image: 1_12_09_14_11_07_03.png]
#8
Welcome Bill,

That is a true treasure you have there. These cars are so old now but will always look exotic and modern. Looking forward to seeing more photos.
#9
Welcome from Arkansas
#10
Welcome from TriCities WA. Your car looks really nice.
-jbojo

-john
(jbojo)
351C 4V cc heads, 10.5 : 1 CR, 290 Herbert cam, Flat top forged pistons, forged connecting rods, Atomic efi,
C6 with Gear Vendor overdrive, 3.89 Tru Trac, Hooker Super Comp with 2 1/2" Pypes Exhaust.        

Some Mod pictures can be seen at:

Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
runninpony New member Basswacker 23 436 06-10-2018, 07:00 AM
Last Post: luxstang
  New member from Southern California veerdena 22 646 04-23-2018, 10:28 AM
Last Post: Musti
  New Upstate NY member royalrider33 22 607 03-25-2018, 06:02 AM
Last Post: Musti
  New member 1Goldcjmach 52 1,571 02-10-2018, 12:05 PM
Last Post: 1Goldcjmach
  New Member NE Ohio rotorr22 29 855 01-22-2018, 11:34 PM
Last Post: rotorr22
  new member looking for a 71 R or J code jcode71 13 1,508 07-12-2017, 09:54 AM
Last Post: Boss1Ray
  New member from Philadelphia acc518 22 1,126 06-15-2017, 01:10 PM
Last Post: bkdunha
  New member from Guatemala RCH71 21 1,358 06-11-2017, 09:10 AM
Last Post: DK73



Users browsing this thread: 1 Guest(s)