• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
New life into old paintjob all 3 of them
#11
Take the car to a local auto paint supply house that can load paint into a rattle can. Have them scan the car and make you a can to match the blue and the silver. I'd only fix what needs fixing and leave it at that. If you dig into it, you might start down a rabbit hole. You can probably work out most of the dent in the RH quarter if you pull the interior trim panel and do it from the inside. Be very gentle as I see filler in that area.


  Reply
#12
Hey if you toss the stone guards I want them. Period correct up into the 80's Ford sold them. I am missing one on my 73.
David


When a man is in the woods and talks and no women are there is he still wrong??
Tongue
David
  Reply
#13
(06-13-2018, 03:25 PM)Hemikiller Wrote: Take the car to a local auto paint supply house that can load paint into a rattle can. Have them scan the car and make you a can to match the blue and the silver. I'd only fix what needs fixing and leave it at that. If you dig into it, you might start down a rabbit hole. You can probably work out most of the dent in the RH quarter if you pull the interior trim panel and do it from the inside. Be very gentle as I see filler in that area.

Good eyes on the body filler.  Seems to have been hit there more than once. The current dent was caused in a parking lot in an aparment complex. 

Ill look into finding a paint supplier that can do that.  
Do most paint suppliers have that ability?
  Reply
#14
(06-13-2018, 04:20 PM)Carolina_Mountain_Mustangs Wrote: Hey if you toss the stone guards I want them. Period correct up into the 80's Ford sold them. I am missing one on my 73.
David

You can have them. I doubt they are ford though. Most likely autozone specials. Ill pull them off today providing none of the screws are stripped.
  Reply
#15
Here is what they look like. No name or logo to be found. If you still want them let me know.
[Image: 20180615_163225.jpg]

[Image: 20180615_163230.jpg]
  Reply
Share Thread:  




Users browsing this thread: 1 Guest(s)