• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
New Fuel Line
Just got my new fuel line.
We discovered a pinhole in the current line near the tank
and decided to replace the whole line rather than do a patch
job. A previous owner replaced the line but with incorrect
routing. The new line is 3/8 SS and has a shipping bend
about 180 degrees and maybe 20 inches in diameter.
That portion is labeled "shipping bend". Go figure.
Any members have a method for straightening the
line without damaging it?


[Image: 1_11_11_13_11_50_27.png]
This is quite common, and relatively easy to undo. Simply bend it back by grabbing the lines beyond the bend and working it slowly back in line---the line is quite flexible. Just don't overdo things and kink the pipe.

Let me check your shorts!

[Image: Flamicon2.jpg]

[Image: oldfart.png]
I have always used the garage floor starting arms length from the bend and pushing it to the floor. That bend is designed to be the strait run.

[Image: 2rr7aiv.png]

Just cruising along minding our own business when BAM!!! The LAWS show up.
Share Thread:  

Possibly Related Threads...
Thread Author Replies Views Last Post
Wrench Fuel sender alignment Ballaratcastle 8 226 12-09-2018, 07:42 PM
Last Post: Ballaratcastle
  routing of gas line at tank rjpohl 8 225 11-13-2018, 07:14 PM
Last Post: Stanglover
  vacumn line and thermal switch naa10104 3 333 07-09-2018, 07:04 PM
Last Post: naa10104
  No fuel can't start. mweeps 1 335 05-19-2018, 11:38 AM
Last Post: Don C
  fuel sending unit pedstagn71 1 266 05-13-2018, 04:44 PM
Last Post: Don C
runninpony Fuel Vapor Canister NOT A T5 3 504 04-01-2018, 06:11 AM
Last Post: NOT A T5
  '73 fuel tank removal scottyrocks 8 916 03-20-2018, 08:46 AM
Last Post: Stanglover
  Fuel vapor separator asusnz 12 2,843 10-13-2017, 05:23 PM
Last Post: erikroy57

Users browsing this thread: 1 Guest(s)