• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Need to install and adjust windows and convertible top at the same time
#1
I'm installing Windows in my convertible but I also dismantled and assembled the convertible top and have to install it too. I'm not sure how to start. Do I install the windows and adjust the convertible top around them? If anyone has a recipe on how to do this with the least amount of pain please let me know.

- Jim
  Reply
#2
My guess would be that you install the top first and adjust the Windows to it as the top doesn't really give you that much in terms of adjustment.
But, like I said, it's a guess.
Let's wait for the guys who know what they're talking about. Smile

[Image: 1z21rv4.png]

Mike

"If I were you...... I´d rather be me."  Tongue

Check out my video:
http://www.7173mustangs.com/thread-my-mustang-in-action

  Reply
#3
Hi Jim,

Mike's on the money!

The logical and correct approach would be to first install your top, and concentrate on getting it setup with the action and being aligned properly. The power action has to be checked so that both pistons are working in correct unison and not forcing the top out of alignment when going up or down. Also check for rubbing of the vinyl on both sides of the top (the C pillar section) where it comes into close contact with the chrome dress mold around the back of the quarter panels area. This can be a bad problem. I had this problem myself on the passenger's side only, and it caused a lot of grief for me and was very hard to try and rectify as well. Also, when the top is closed and latched, look at the two side frame rails that are positioned above the main side window glass. These side rails should be sitting as straight as possible, and not have any dog's leg type bends in them. If they have got bends then the top edge of the main side window door glass will not sit properly up to the rubber.

Once you're satisfied with getting the top all sorted out, you can install and adjust the main side glass and quarter window glass to come up to and mate up properly with the top frame and the A and C pillars. You will have left to right and right to left, up and down, rocking action adjustment, as well as in and out adjustment of all the window glasses.

Hope that helps,

Greg.Smile

whistling LORD, MR FORD - JERRY REED
  Reply
#4
I will install the windows first, and do final adjustments once my top is installed. It should not matter either way, but as others noted, finalizing the top install would be important before bolting down the windows in place based on the top positioning. I anticipate adjustments on both ends when all is said and done. I am not looking forward to that part of the rebuild...
  Reply
Share Thread:  


Possibly Related Threads…
Thread Author Replies Views Last Post
check Sound off if you have a convertible Don65Stang 220 37,928 10-08-2019, 08:20 PM
Last Post: Three Ponies
  Looking for a 71 Convertible USAFPILOT 0 121 09-23-2019, 11:56 AM
Last Post: USAFPILOT
  what Color is your 7123 Convertible? Don65Stang 49 10,156 08-18-2019, 08:12 AM
Last Post: 7173Vert
  Convertible top pump and fluids RC92234 6 313 07-22-2019, 05:51 PM
Last Post: Ginger_73 convertible
  72 Convertible Deluxe Interior Door Pulls JLUECKEL 6 356 07-20-2019, 02:19 PM
Last Post: Hemikiller
  Replacing the top, have the glass RC92234 7 272 07-09-2019, 03:05 PM
Last Post: Hemikiller
runninpony Convertible latch cv_72mustang 0 258 04-15-2019, 10:03 AM
Last Post: cv_72mustang
  Which Top To Buy AZ2ME Vert 16 682 03-13-2019, 09:10 AM
Last Post: OMS



Users browsing this thread: 1 Guest(s)