• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
NEED ASAP. Ia rag joint for the tilt column. For my wife's surprize resto
Still need the top............
(05-18-2017, 02:39 PM)NG8264723 Wrote: Still need the top............

Go measure the spline diameter and count on your column (incuding the ones milled off for any flat spots).  Once you post that handy bit of info I'm sure something can be found that would work.

the top is not splined it is a 3/4 "D"
Speedway motors sells this one, it is for double D shaft.

[Image: IMG_2697.jpg]

The box end of it is incorrect, you could do one of two things.

1) Drill the rivets and bolt the 13/16 end from another coupler onto it.

2) Get the input out of the newer 3/4" GM Saginaw box (1978? + newer) and put it in your box.
Thanks for the link but my shaft is a "D" not a double "D". I could make that work but it would require machining
Single D... That is weird, explains why WCCC wants them in any condition.

You might be able to use a Borgeson 054940. I don't know if it is clocked correctly, but like you say it could be made into a single D on a milling machine with a rotary table. A machine shop should be able to do it in an hour or less.
They're not really even a single "D", they're more like a splined shaft with a 1/4 or 5/16" wide flat spot on it. WCCC shows a picture of it.

“If you can't explain it simply, you don't understand it well enough.”
--Albert Einstein

Possibly Related Threads...
Thread Author Replies Views Last Post
runninpony [WTB] Steering column collar clip NOT A T5 2 343 03-29-2017, 05:11 AM
Last Post: NOT A T5
  [WTB] 17 mm DD half rag joint 73MACH1WV 8 740 02-24-2016, 05:22 PM
Last Post: 73MACH1WV
  WTB ASAP: 71-73 Mustang Seat Tracks 4mm 2 499 05-13-2015, 11:52 PM
Last Post: 4mm
  Need help, looking for asap (rear sway bar hardware) eddyw 13 1,569 04-16-2015, 06:19 PM
Last Post: Motorcity Mustang
arrow Tilt column Muswagon 6 731 01-30-2015, 08:43 PM
Last Post: Muswagon
  Steering column shroud Omie01 1 442 01-25-2015, 07:11 PM
Last Post: Motorcity Mustang
  Tilt Steering Column Steven Harris 2 508 04-22-2014, 09:53 PM
Last Post: Steven Harris
  Looking for lower column to dash trim - Black jb73Mach 3 563 03-09-2013, 11:11 PM
Last Post: Motorcity Mustang

Users browsing this thread: 1 Guest(s)