• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
my rear end is getting loose and making noise
#11
I have to let others take a shot at being first sometimes...

Let me check your shorts!
http://midlifeharness.com

[Image: Flamicon2.jpg]


[Image: oldfart.png]
  Reply
#12
Norm I have a spare 8" center section. Not sure of it's condition. I did drive the car around the block but don't recall any noise or not.

- Mike
  Reply
#13
Just rebuilt my 9".  Built a small cradle out of a couple of 4x4's to let the pumpkin drop on to.   The rebuild is not so hard if you have the right tools.  Picked up a couple of video's from Bad Shoe Productions http://www.badshoeproductions.com/ on how to do the rebuild.  While your at it now is the time to replace the seals in the  rear end also.
  Reply
#14
(09-08-2018, 11:35 PM)mach71351c Wrote: Norm I have a spare 8" center section. Not sure of it's condition. I did drive the car around the block but don't recall any noise or not.

wow that is a nice offer . i found a shop called MIT DRIVE TRAIN SPECIALIST he quotes a price if i bring it in   
bearing kit 141$
labor 105$
and if needed ring and pinion  set 175$

421$+tax 
he said that the ring and pinion hardley fail 

so without ring set its 246$+ tax 

sounds like a fair price to me
  Reply
#15
(09-09-2018, 09:45 AM)Kilgon Wrote: Just rebuilt my 9".  Built a small cradle out of a couple of 4x4's to let the pumpkin drop on to.   The rebuild is not so hard if you have the right tools.  Picked up a couple of video's from Bad Shoe Productions http://www.badshoeproductions.com/ on how to do the rebuild.  While your at it now is the time to replace the seals in the  rear end also.

thanks
  Reply
#16
(09-09-2018, 10:01 AM)nailpounder Wrote: so without ring set its 246$+ tax 

sounds like a fair price to me

I agree, very reasonable price, especially if you don't already have all the tools needed for the job. However, if you're like me, I'm always looking for an excuse to buy another tool Smile



“If you can't explain it simply, you don't understand it well enough.”
--Albert Einstein
  Reply
Share Thread:  


Possibly Related Threads…
Thread Author Replies Views Last Post
  Rear diff oil change mustangandy 8 415 08-05-2019, 08:20 AM
Last Post: Don C
  rear end conversion don blanchard 5 478 05-08-2019, 06:13 AM
Last Post: turtle5353
  351 Top end reinstall questions scgamecock 2 286 02-22-2019, 05:54 PM
Last Post: kcmash
  Regear Rear End icejawa 30 1,413 02-07-2019, 01:23 PM
Last Post: Hemikiller
  73 302 ro 351w swap now transmission noise samckay 17 959 02-02-2019, 04:10 PM
Last Post: tony-muscle
  Recommended Rear End Ratio - 6 Speed TheDude 17 1,054 12-27-2018, 08:28 PM
Last Post: boilermaster
  Rear Axle Housing Dimensions tony-muscle 6 478 11-22-2018, 01:12 AM
Last Post: tony-muscle
  rear end markc 6 606 10-14-2018, 12:24 PM
Last Post: markc



Users browsing this thread: 1 Guest(s)