• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
My 1971 Mach 1Recently Acquired
#1
Gents-

Bought a nice 1971 Mach 1 I am going to keep. http://gatewayclassiccars.com/houston/19...-S815.html  VERY similar to my first car in High School, purchased in 1975 when I was 15, which was a Red 1972 Mach 1 H Code with white interior.  My High school car did not have disc brakes, or a/c, but otherwise very similar. Both have P/S, thankfully also. Paid top dollar, but it is very original, (which I prefer), and the previous owner has been very helpful with telling me his experience, etc. to give me a head start.  I always do that when I sell a car, and boy does it help!  My preferences are my opinions only, and not right or wrong, just my own preferences and opinions.  Starting with the fact that I love the lack of hockey puck stripes, spoilers, the color(s), disc brakes, power steering, etc. and complete lack of rust which was a requirement of mine.

I have already fixed the exhaust tips to correct style, and am about to attack my existing front and rear springs, replace the antenna with the correct one (already have it), replace the spark plug wires with the correct style, order a Tach conversion for my clock from Rocket man http://www.rccinnovations.com/index.php?...ustang-all , and replace my front hood springs which are a bit weak.  Car is rust free, and while I grew-up in Portales, NM, THIS car was sold right down the street from me where I live today in Dallas, TX! Saw that when I pulled the Marti.
[Image: 1_F05_H152742_dlxrpt.jpg]

So I could not be more pleased.  I have owned and sold a 1971 M code and a 1971 429 Mach 1. Both were red, which I sold at Barret Jackson back in 2013. I am not into trying to make this thing go faster, really, as I have a 2015 anniversary Mustang GT which is plenty fast, and I just want this one to be reliable, and as original as possible with a few exceptions: 1) the aforementioned tach, 2) probably a Sanden type a/c compressor.  I usually avoid a/c cars as it adds to complexity, but this car's is already converted and working o/k....the sanden will draw less power, and dropa  little weight. 3) springs, shocks etc. 4) maybe an aluminum air gap manifold and 600cfm carb for weight savings and because I always wanted to do that in 1975-1979 when I owned the car, but never did! 5) maybe a 3.25 axle ration from the current 3.0. 6) battery bracket for inner fender (just purchased) 7) seat hinge covers (just purchased) if they are correct for this car 8) and I need to find a good, WORKING, original AM/FM radio. That's about it for now!

As you can see, I do like to lighten a car when I can (i.e. the compressor, and maybe the intake) which is not necessarily rational, and I readily admit that!  I might use some aluminum repro magnum 500's, but probably not.  I strangely wish for a set of aluminum wheels my dog dish hub caps and trim rings would go on! go figure.


Thank you in advance for your help, and for help in the past.  I had an inspection done by a friend I met on this site on a car I chose not to buy.  Mistake avoided! I have bought and sold parts here, and want to say thank you for that also.

Best,

Bradford in Dallas aka Griffbl on this site!


2014 F150

  Reply
#2
Welcome from TriCities WA.

-john
(jbojo)
351C 4V cc heads, 10.5 : 1 CR, 290 Herbert cam, Flat top forged pistons, forged connecting rods, Atomic efi,
C6 with Gear Vendor overdrive, 3.89 Tru Trac, Hooker Super Comp with 2 1/2" Pypes Exhaust.        

Some Mod pictures can be seen at:

  Reply
#3
Welcome from San Diego. Congrats on your new ride.

- Mike
  Reply
#4
(07-09-2017, 12:51 PM)jbojo Wrote: Welcome from TriCities WA.

Thanks John!


2014 F150

  Reply
#5
(07-09-2017, 02:00 PM)mach71351c Wrote: Welcome from San Diego. Congrats on your new ride.

thanks Mike!


2014 F150

  Reply
#6
Welcome from Tucson, AZ!!

Thanks

Tim
Tucson, Az
1973 SportsRoof
351C bored .040
Crank .020  and Stock cam
Flattop pistons
Edelbrock 4bbl CARB 800 CFM ELEC CHOKE
Edelbrock Performer 2750 Intake Manifold

[Image: NewPrimedHood_zpsw2jaj0cu.jpg]
  Reply
#7
Welcome from across the pond in the UK
Thats one sweet car you own. Congrats

Steve
1971 Grandé
  Reply
#8
Thank you. We love our Mustang loving cousins in the UK!

Best,

Bradford


2014 F150

  Reply
#9
Looks as new!
Welcome from the northern Netherlands!

73 modified Grandé 351C. Almost done. 
71 429CJ. In progress
  Reply
#10
(07-09-2017, 03:51 PM)Fabrice Wrote: Looks as new!
Welcome from the northern Netherlands!

thank you sir! She is in very good shape.  Good luck on your 429 build!

Bradford


2014 F150

  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
bulb Mach 1. Not lost DTRoss 5 367 03-25-2018, 11:14 PM
Last Post: 6972boss
  2 71 mach 1 capehorn3005 9 682 02-11-2018, 03:03 PM
Last Post: DK73
  2 71 mach 1 capehorn3005 5 433 01-02-2018, 01:05 AM
Last Post: capehorn3005
Magnum Hello from Germany - 1972 Mach 1 Whitesnake 24 1,482 09-24-2017, 10:03 AM
Last Post: Vicus
Stang My '73 Mach 1 and I say Hi GeoBW 25 1,347 09-23-2017, 09:02 PM
Last Post: david.egan.902
  27 Years Later- I am back in a Mach 1... Teach 14 949 09-21-2017, 06:42 AM
Last Post: Teach
  Greeting from the north of The Netherlands, new Mach 1 owner Sippie 36 2,482 06-19-2017, 01:58 AM
Last Post: Vinnie
  "new" Mach 1 project, East Tennessee Wilco549 20 1,763 06-18-2017, 11:56 PM
Last Post: OzCoupe72



Users browsing this thread: 1 Guest(s)