• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Big Grin Well motor RUNNING. Did break-in and will change oil in AM. Had lots of smoke inside car so think it is oil gauge as press started to drop off as smoke increased.

I want to thank everyone for the support and encouragement since this project started last August. Now at least I car drive and enjoy it as additional improvement come up. I'll keep my fingers crossed.

Alan L

[Image: 1_30_09_13_10_12_32.png]
Alan L
So glad to hear that!!! Now have some fun!!!! I have a running engine but the car is not done to put it in. I made and engine run stand so I can run it.
THAT'S GREAT, Alan! How did everything sound when she was running? If you doubt the oil pressure gauge, get a new one hooked up before you start it again just to make sure that it's not something internal that is causing the pressure to drop. When you fire it up next, eyes go straight to the new OP gauge, and if it's not where it should be, pay quick attention to engine sounds and shut her down.

I'm sure that everything is AOK and looking forward to a couple of pics or a short video clip so I can hear the thunder. Smile YAHOO!



[Image: 6y14ea.jpg]

Project started 8-7-10
Completed: All new suspension, rebuilt 351C H Code bored .030 over with mild cam and intake, new 3.50 TracLok, custom exhaust system
Current "mini-project": interior upgrade Undecided
Congrats Alan.

Jeff T.

Low buck, touring style, '73 Convertible "rolling restoration", 351c, 2v heads with a shave and a haircut, Performer intake, Holley 650(ish), roller rockers, screw in studs, guideplates, stainless valves, Duraspark / Motorsports MSD, T-5 conversion. 1-1/8" front, 3/4" rear swaybars KYB shocks and some home brewed subframe connectors. Future plans; JGC steering box, Cobra brakes and... paint, interior, etc.

When I die I want to die like grandpa, peacefully in my sleep... not screaming, like his passenger.

[Image: 1_12_09_14_10_15_11.png]
goodjob run_horse
Great job, I would like to have seen the smile on your face!

Mike AKA Ole Pony & Rare Pony

Our current Mustang garage/driveway
1973 Mustang Convert - Bought in 1974 - Still have it!
2004 Mach 1 Oxford White Auto, Bought Sept 06

[Image: 20180127_082009.jpg]

upload a photo on internet

Good job!


[Image: 25yvyp3.jpg]
Glad to hear it is running...

[Image: 20r9ylt.jpg]
Share Thread:  

Possibly Related Threads...
Thread Author Replies Views Last Post
  Anyone running magnaflow Mufflers mbrew2 24 669 Yesterday, 09:39 AM
Last Post: Stanglover
  Anyone running Flowmaster 15807 2.5" tailpipes? Bentworker 7 221 11-16-2018, 11:31 PM
Last Post: Bentworker
  Motor combo. scgamecock 6 350 11-14-2018, 12:30 PM
Last Post: barnett468
  What FI systems are you guys running? scgamecock 1 239 11-11-2018, 02:43 PM
Last Post: Don C
  Motor mount vs Frame mount question crzyfun 8 477 09-15-2018, 12:31 PM
Last Post: Don C
  429 motor and c6 trans Newold 3 419 09-09-2018, 06:23 AM
Last Post: Hemikiller
  1973 351 C running hot issues Carolina_Mountain_Mustangs 27 1,373 08-08-2018, 10:28 AM
Last Post: Carolina_Mountain_Mustangs
  Rebuild or Buy new motor Cresee 21 1,565 05-12-2018, 07:56 PM
Last Post: barnett468

Users browsing this thread: 1 Guest(s)