• 1 Vote(s) - 5 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Met the Meet and Greet Moderator Jeff73Mach1
During my recent 2200 mile vacation I took the notion to do an overdue visit with my great phone buddy Jeff in Nashville and Roy Tnfastbk in Knoxville TN.
Jeff has been extremely helpful and generous in my 73 build over the years and this visit was way overdue.
His 408 build is in a word WOW!
We took the car to the muffler shop to get his 3 inch stainless system installed and of course had to test the noise levels of the new set up. The setup in my opinion is perfect. Not too loud when up to speed as we had great conversations in the car. But with the windows down and in the gas the whole neighborhood can here that animal coming from a mile away.
I had a great time helping Jeff wrench on the car with a few odds and ends and really wish I had more time to spend. It's a brave man that allows a stranger to go at his car with a 4 1/2 grinder with a cutting blade attached!
Jeff and Roy are perfect hosts and even though Roy had just undergone elbow surgery 6 days before we had a great visit (wished I'd have taken pictures with Roy though) he was as usual very upbeat.
Tennessee has 2 great ambassadors to our hobby. Many thanks to you both. Had a great time! Thankyouyellow

[Image: 30lp0uw.jpg]
[Image: 2i087sy.jpg]
[Image: 2iw7s79.jpg]
[Image: pauy9.jpg]

[Image: 2rr7aiv.png]

Just cruising along minding our own business when BAM!!! The LAWS show up.
It was overdue. Glad we could hang out and piddle with the car. My exhaust is not stainless however-just the mufflers. Wink and my engine is a 393C not a 408-Roy is still the CID leader in our area.

Mark hauled off a few odds and ends that I might have otherwise had to send to the scrapyard. I imagine he will clean and cut and fabricate them into pieces that will be better than new. And I have room to store more crap . . .

Thank you for not telling everyone how bad my tool box and cart looked, the embarrassment would be like I was an Auburn fan or something.

[Image: 1_01_07_15_8_53_18.png]

"I love my Hookers!" and "Get some Strange" probably have a different connotation to non automotive enthusiasts!
Sounds like a fun visit. Thx for posting and the pics.

351C 4V cc heads, 10.5 : 1 CR, 290 Herbert cam, Flat top forged pistons, forged connecting rods, Atomic efi,
C6 with Gear Vendor overdrive, 3.89 Tru Trac, Hooker Super Comp with 2 1/2" Pypes Exhaust.        

Some Mod pictures can be seen at:

Sweet looking car and gotta love those face-to-face meets!

- Jim
Sounds like a great meet-up. I awarded Mark his first Meet and Greet award!

Mike AKA Ole Pony & Rare Pony

Our current Mustang garage/driveway
1973 Mustang Convert - Bought in 1974 - Still have it!
2004 Mach 1 Oxford White Auto, Bought Sept 06

[Image: 20180127_082009.jpg]

upload a photo on internet

Its great to see Members meeting up, and trusting them with a 4 1/2" grinder on their car Big Grin

1972 Mustang convertible run_horse  
Visit the Mustang Car Club of New England Facebook Page

Visit the Mustang Car Club of New England Web Page
Cool...good job guys!

[Image: 386_07_10_13_5_58_42.jpeg]
My Mustangs:
71 M-code Mach 1, Medium Blue/White Sport, 4R70W, 3L50, Factory Ram Air.
72 Q-code Mach 1, Pewter/Black Sport, 4-spd, 3L25.
65 Convertible, Britney Blue/White/White, more modified than original.
05 Convertible, Legend Lime/Tan/Tan, future classic??
Share Thread:  

Possibly Related Threads…
Thread Author Replies Views Last Post
tunes '71'73 Mustangs.com Annual Meet & Greet Tubo 53 5,509 02-02-2018, 09:40 AM
Last Post: bkdunha
  Meet at Spangdahlem Air Base (Germany) Vicus 8 1,635 07-10-2017, 06:44 AM
Last Post: c9zx
  Meet Wolverine In Phoenix Area Wolverine 3 896 08-28-2016, 01:17 PM
Last Post: OLE PONY
  San Antonio'ish Meet Up? EdM 2 835 03-06-2016, 12:16 AM
Last Post: EdM
  Massachusetts meet? mrmach1 4 1,054 06-30-2015, 10:24 PM
Last Post: Elizabeth73

Users browsing this thread: 1 Guest(s)