• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Mach1 - interior upper rear panel to rear window
#1
who can give me directions for installation of these upper inner rear panels?
How these are fixed in the upper edge to the window ? There is no molding to cover, correct? No wholes to fix with screws?
Mine are over bent ! Are these are available to buy somewhere?
I checked the forum but did not find any post on this topic?!
Any guidance is welcome!
[Image: 2_E47_B7_CB_F388_4_D23_92_DA_A4_D0_B80319_FD.jpg]

[Image: 5_CDD4_C49_5725_4_A76_A9_FF_90538_E4_D3387.jpg]
[+] 1 user Likes Engine302's post
  Reply
#2
Headliner goes in first. These go over the lower edge of the headliner and wrap around the rear window pinch weld and the retainer by the qtr window, which I don't see in your picture. There's also a door panel style clip that goes into that hoel int he sail panel.


  Reply
#3
Yup!

There's also a vintage headliner installation article at Mustang-360 that also talks about the sail panels.

http://www.mustangandfords.com/how-to/in...r-install/

Eric

[Image: mach1sig2.gif]
  Reply
#4
(08-29-2018, 07:40 PM)Mister 4x4 Wrote: Yup!

There's also a vintage headliner installation article at Mustang-360 that also talks about the sail panels.

http://www.mustangandfords.com/how-to/in...r-install/

Great- this helps me a lot!
  Reply
#5
Don't want to hijack this post but I have a question about 1 of the pictures in that article.  Does the rear glass have to come out in order to install the headliner????

http://image.mustangandfords.com/f/86713..._large.jpg

Thanks!
Wade
1972 Mach 1 351 cj 4speed
"We confide in our strength, without boasting of it; we respect that of others, without fearing it."--Thomas Jefferson

  Reply
#6
(08-30-2018, 07:18 AM)scgamecock Wrote: Don't want to hijack this post but I have a question about 1 of the pictures in that article.  Does the rear glass have to come out in order to install the headliner????

http://image.mustangandfords.com/f/86713..._large.jpg

Pretty sure it does. Probably needs to come out anyway to fix any rust issues. They used a sucky foam tape to seal up which should be replaced with regular sealer used with rubber gasket install. New gasket also.


When a man is in the woods and talks and no women are there is he still wrong??
Tongue
David
  Reply
#7
(08-30-2018, 07:53 AM)Carolina_Mountain_Mustangs Wrote:
(08-30-2018, 07:18 AM)scgamecock Wrote: Don't want to hijack this post but I have a question about 1 of the pictures in that article.  Does the rear glass have to come out in order to install the headliner????

http://image.mustangandfords.com/f/86713..._large.jpg

Pretty sure it does. Probably needs to come out anyway to fix any rust issues. They used a sucky foam tape to seal up which should be replaced with regular sealer used with rubber gasket install. New gasket also.

Guess I will be driving it to the upholstery shop with no back window.  I'm not going to do the headliner myself.

Thanks!
Wade
1972 Mach 1 351 cj 4speed
"We confide in our strength, without boasting of it; we respect that of others, without fearing it."--Thomas Jefferson

  Reply
#8
SC,
Yes the rear window has to be removed to install the headliner.
Thanks, Jay
  Reply
#9
(08-31-2018, 06:08 AM)clevelandcoupe Wrote: SC,
Yes the rear window has to be removed to install the headliner.
Thanks, Jay

Thanks Jay.  What about the front window?  Pretty sure I can drive the car to the interior shop with no back window installed but dot think I can get away with no front window.... Haha

Wade

Thanks!
Wade
1972 Mach 1 351 cj 4speed
"We confide in our strength, without boasting of it; we respect that of others, without fearing it."--Thomas Jefferson

  Reply
#10
It's easier with the windscreen out, but can be done with it in. The upholstery shop could probably R&R the rear window for you.


  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Upper corner panels Robsweden 2 118 11-19-2018, 10:37 AM
Last Post: Robsweden
  Interior Panels pwnedurass 6 283 11-14-2018, 10:08 AM
Last Post: Carolina_Mountain_Mustangs
  Interior clock Dalis 8 297 11-03-2018, 06:12 AM
Last Post: goodnigh
  Interior Quarter Panel screw JimB73 7 353 10-19-2018, 05:20 PM
Last Post: JimB73
  73 Mach 1 Rear Quarter Windows - Any Conversion Kits??? bytor2112 4 264 10-13-2018, 09:56 AM
Last Post: Carolina_Mountain_Mustangs
  Misc. Exterior and Interior Odds/Ends icejawa 48 2,101 10-05-2018, 05:26 PM
Last Post: icejawa
runninpony Interior Quarter Panels NOT A T5 8 383 09-29-2018, 05:17 PM
Last Post: 71 gbvert
  Bucket seats in the rear. Rockinrednek 6 357 09-12-2018, 12:29 PM
Last Post: detritusmaximus



Users browsing this thread: 1 Guest(s)