• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Mach 1 Lower outside door trim/molding question
#1
Hello Everyone,

I'm hoping that someone can help me with the Mach 1 "chrome" trim that runs along the lower outside of the body.  Are the pieces on the driver's and passenger's door the same (ie can they be used on either side) or are they different?  You can see the trim piece here on the passenger door.

Thank you,
Scott

[Image: c2579a3fda388fa.jpg]
  Reply
#2
I installed the lower body trim on a mach 1 last year. If I remember correctly, the doors are the same. Both have a squared off end. The fender and quarter panel ones are specific to each side since the ends have a taper to match the wheel well openings.

Kevin

1971 Mach 1
408C Stroker
C4 w/3,000 stall
8.8" Rear w/3.73's
Disc brakes all way around.

[Image: 28ivsix.png]




                                                                                             
[+] 1 user Likes turtle5353's post
  Reply
#3
(05-25-2018, 12:39 PM)turtle5353 Wrote: I installed the lower body trim on a mach 1 last year. If I remember correctly, the doors are the same. Both have a squared off end. The fender and quarter panel ones are specific to each side since the ends have a taper to match the wheel well openings.

Good to know.

BTW - I finally scored the missing pieces of the rocker molding I was needing - just need to clean them up now, so I'll be re-reading your comments about installing them on the restoration you recently completed, along with maybe hitting you up with some advice (since I no longer have the factory pins to use).  

Thanks again for the awesome deal on the set you sold me.

Eric

[Image: mach1sig2.gif]
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Please read Drake made the lower control arms backwards Carolina_Mountain_Mustangs 1 84 10 hours ago
Last Post: jeff8877
  grille trim removal and installation rjpohl 7 351 02-13-2019, 08:47 AM
Last Post: mustang7173
  Door sill area jpaz 5 229 01-18-2019, 11:59 AM
Last Post: jpaz
  Welding question on front aprons slowpoke17 4 305 01-08-2019, 10:00 AM
Last Post: Hemikiller
  Vinyl roof trim removal Al rumble 7 317 12-31-2018, 10:48 AM
Last Post: Carolina_Mountain_Mustangs
  Stock Paint 73 mach 1 rjpohl 22 790 11-26-2018, 03:09 PM
Last Post: Hemikiller
  Roof rail seals question Danno 6 306 11-25-2018, 12:24 PM
Last Post: Danno
  door weatherstrip channel rjpohl 2 220 11-16-2018, 11:47 AM
Last Post: rjpohl



Users browsing this thread: 1 Guest(s)