• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Lower ride height with Boss 351 leaf springs?
#1
Someone told me that the rear leaf springs for the Boss 351/HO are stiffer and lower the ride height by approx 1 inch compared to the "normal" rear leaf springs.
For lack of comparison, I would not know about it.
Can anyone confirm or refute that assertion?
It would be a cheap possibility to get rid of the lowering blocks compared to the Grab-A-Track leafs.

[Image: 1z21rv4.png]

Mike

"If I were you...... I´d rather be me."  Tongue

Check out my video:
http://www.7173mustangs.com/thread-my-mustang-in-action

  Reply
#2
I know the boss springs are stiffer than regular mustang springs, but I don't know about the ride height.I've been wondering the same thing.I have grab a trac standard height 4.5 leaf springs now and I am not to happy with them.I think they are going to be to stiff for good weight transfer and sit to high and the biggest thing I've been mad about is they are stamped made in India.I believe I am going to sell them and buy some Eaton's.Maybe someone that knows about the ride height will chime in.

Jay
73 mach1
  Reply
#3
Guy's,
Your best bet is to buy a quality leaf spring..in the 4 or 4.5 leaf depending on how you drive the car..If your looking for approximately a 1" drop than you add the mideye option..There's only three places I would buy rear leafs from..
http://www.eatonsprings.com/
http://www.streetortrack.com/
or you can get the same ones I installed in my car (4.5 leaf mideye)
http://www.totalcontrolproducts.com/leafsprings.html

LOVE OF BEAUTY IS TASTE..THE CREATION OF BEAUTY IS ART
  Reply
#4
I checked my Master Parts List to verify, and there is no ride height difference. There are a lot of variables for spring rate, such as when it was built, body style, competition suspension or not, and yes, engine. The Boss for '71/'72 actually shows one of the lightest spring rates at 550 lbs, but then they were built as light weight drag racers, so that makes some sense. I bought springs for one of my cars from Eaton, and they have a program to get the right spring for your car, but can modify them to your tastes as well.

Steve
  Reply
#5
Ok, thanks.
I will probably go the way Q suggested. (thanks)
I just wanted to make sure, as I could not imagine Bosses dragging their tails compared to other Mustangs from the same area.
If I swap then for something decent.

[Image: 1z21rv4.png]

Mike

"If I were you...... I´d rather be me."  Tongue

Check out my video:
http://www.7173mustangs.com/thread-my-mustang-in-action

  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Rear Leaf Springs worn out? digithead 15 362 06-05-2018, 01:10 PM
Last Post: c9zx
  Looking for new leaf springs RadRacer203 15 633 04-04-2018, 11:14 AM
Last Post: Carolina_Mountain_Mustangs
  Ride height Kammertime 1 418 12-22-2017, 09:24 PM
Last Post: libram
  Lower control arm and strut rod bushing help needed vikingsandpintos 5 551 12-11-2017, 10:21 AM
Last Post: OMS
  4-leaf springs - 250lb rate? cudak888 9 697 10-23-2017, 04:05 PM
Last Post: cudak888
  Leaf Springs naa10104 30 1,597 10-14-2017, 01:50 PM
Last Post: Stanglover
  Ride Height, Correct Replacement Springs griffbl 6 966 07-31-2017, 01:14 PM
Last Post: griffbl
  Half leaf on rear springs? Stanglover 15 1,528 07-19-2017, 07:50 AM
Last Post: Stanglover



Users browsing this thread: 1 Guest(s)