• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Lots of Tire Information
#1
Was curious about where tires are made. In my searching I found this web site that has lots of info on how to read the codes on the tires and who makes what.
We are down to Goodyear and Cooper being the only two remaining U.S. owned tire mfgs. Cooper was actually going to sell out to an Indian company but is off again on again.
So if you buy tires even though Goodyear or Cooper they can still be imported so check the codes to see where they were made before purchase.
Anyway thought this is good info to know. https://www.utires.com/articles/tires-ma...gn-brands/
The Michelin tire plant that was in S.C. and I think still make some there, had a test fleet that drove through my area ever day. At one time they had compact car, truck, large car and mid size. They just put miles on the cars on actual roads not a track.
I have a friend that worked at Michelin in quality. When they moved some of the mfg. to I think Italy they doubled their tolerances and Italy still could not meet so they just take what they send, lol.
They also tested their heavy truck tires you would see a flat bed tractor trailer with just weights on the back. Sometimes they would have an empty rim in the inside to overload the single tire.
When the wide heavy truck tires came out I bet they tested for two years before you saw them on regular trucks. They came from Spartanburg, S.C. through Hendersonville, N.C. on into Tennessee and back every day. Would have been a boring job, lol.


When a man is in the woods and talks and no women are there is he still wrong??
Tongue
David
  Reply
#2
When I was growing up there were five main tire companies in my hometown.
Goodyear, Goodrich, Firestone, Dunlop and Seiberling .
I think only Goodyear now and they only make specialty tires.

mike

[Image: 1_11_11_13_11_50_27.png]
  Reply
#3
Toyo's have been the best I have owned.
  Reply
#4
I have Mickey Thompson's on mine 
and I bet when I flatten these, I won't be able to replace them
[Image: micky.jpg]

[Image: siggy.jpg]

  Reply
#5
(02-23-2019, 01:17 AM)1sostatic Wrote: I have Mickey Thompson's on mine 
and I bet when I flatten these, I won't be able to replace them
[Image: micky.jpg]

I think in that info it said Cooper made MT.


When a man is in the woods and talks and no women are there is he still wrong??
Tongue
David
  Reply
#6
I have been a Goodyear guy ever since my first car. I ran Goodyear Eagle STs for many years, but sadly, Goodyear has stopped manufacturing them. I currently run the B.F. Goodrich Radial TA. Last week, I attended a big Mopar show here locally, and almost every street driven ( not a strictly show car ) car was running the Radial TA. It seems to me that there is still quite a market amongst the Muscle Car guys for performance oriented , white lettered, correct era dimensioned street tires. Apparently , many companies couldn't be bothered....
[+] 1 user Likes Spike Morelli's post
  Reply
#7
runninpony 
I thought Dunlop was a German company?!

71-73 Mustangs never die, they just go faster!
  Reply
#8
Tires for 14" wheels. Now there's a challenge! 
Only BFG and Cooper make performance tires if you will, for our cars. I had to buy new 14" Magnum 500 wheels about 5 years ago because in years past, some "A hole" had obviously used impact wrenches and egg shaped the bolt holes. My tires were still within age and ware limits. If the tires were not still good, I would have switched to 15" and bought both tires and rims, but I didn't.
Now I need new tires. I have 7" on the front and 8" on the back. Cooper was suggested because of lower cost. However, the largest tire they list for the 14" is 225-60- R14. Not wide enough, so BFG it is as I want 235-60-R14 front and 245-60-R14 back.
Some choice!!
Geoff.

I learn something new every day!
  Reply
#9
(04-26-2019, 03:50 AM)NOT A T5 Wrote: I thought Dunlop was a German company?!

Hmm, I always was under the impression that Dunlop was a British company originally. Dunlop was the most common tire (tyre) I saw when I lived there.
And by the way, we had radial tyres back in the 60's. I ran Goodyear G800 radials in 1967 on my "Vauxhal Viva" When I moved to Canada, I bought my first '71 Mustang in 74 and boy did I have a tough time learning how to drive on Bias Ply tires!

I learn something new every day!
  Reply
#10
Dunlop was a British company, now manufactured by Sumitomo of Japan.

FWIW, Sumitomo makes a good tire.


  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
runninpony Wheel and Tire Packages blkulis 10 1,206 05-16-2019, 01:03 PM
Last Post: Don C
runninpony Tire and Wheel Packages blkulis 0 283 03-16-2019, 03:54 PM
Last Post: blkulis
  Will this tire combo work? scgamecock 24 606 03-01-2019, 10:47 AM
Last Post: scgamecock
  tire sizes for factory 8 inch rims? scgamecock 4 283 02-20-2019, 01:37 PM
Last Post: Hemikiller
  Tire question Danno 8 359 02-10-2019, 09:01 PM
Last Post: Hemikiller
  Wheels & Tire Suggestions Fgerhart01 1 342 01-21-2019, 03:36 PM
Last Post: Don C
  Another Wheel and Tire question jsbcats 10 735 01-01-2019, 03:41 PM
Last Post: Fabrice
  Spare tire options tony-muscle 24 1,875 12-01-2018, 12:49 PM
Last Post: Carolina_Mountain_Mustangs



Users browsing this thread: 1 Guest(s)