• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Looking for info on a Holley 80457-2 carb
#1
Hey folks,

I finally got around to kicking out the LPG (propane) kit. I saw my carb properly for the first time and it's a Holley 80457-2.

Regarding this carb I have 2 questions:
1) Where is the PCV port? I can't find a datasheet for it any-bloody-where!
2) The choke-plate (is it called like that?) was ripped out. Can those be ordered from somewhere?

Any info would be much appreciated!

Thanks,
Vincent.
  Reply
#2
Looks to be a vac secondary 600cfm holley, https://www.google.com.au/#q=holley+80457-2

Anything is possible, It just takes time and MONEY....
  Reply
#3
pegasus;164349 Wrote:Looks to be a vac secondary 600cfm holley, https://www.google.com.au/#q=holley+80457-2

I googled as well of course, still no data sheet...
  Reply
#4
Specs for your carb on pages 15 and 16

http://www.holley.com/data/TechService/T...isting.pdf

The pcv port is the 3/8" tube which on that carb should be located under the vacuum secondary pod i think. There is only one 3/8" tube so it shouldn't be too hard to figure out.

73 conv. 460, D0VE large valve heads, Performer RPM manifold, Voodoo 227/233 cam, Holley 950 HP carb, C6 trans, 3.25 trak-loc.
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Holley rebuild? scgamecock 7 227 10-26-2018, 08:22 AM
Last Post: scgamecock
  Rochester vs Holley mustangandy 16 516 10-11-2018, 08:34 AM
Last Post: Hemikiller
  4300D Carb Flooding - replacement? F16Dad 13 696 09-26-2018, 08:53 PM
Last Post: Andy 351C
  Blue Thunder Intake: What carb size? Machlovin 20 4,119 09-06-2018, 02:24 PM
Last Post: goodnigh
  1972 Q code new carb rugbyguytx 5 1,043 07-30-2018, 04:13 PM
Last Post: jpaz
  Holley Sniper on a 351c Fabrice 45 7,654 07-01-2018, 01:54 PM
Last Post: Fabrice
  Any Holley Ultra Double Pumper Guru's ? scacer1 18 1,025 06-17-2018, 11:13 AM
Last Post: 71fordramair
  Autolite 2100 Carb help Pegleg 3 659 05-22-2018, 05:33 PM
Last Post: Don C



Users browsing this thread: 1 Guest(s)