• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Looking for 351cleveland Edlebrock SVO intake
#21
The good news is that we have not ordered pistons yet.
He rough bored my new 4bolt block on Tuesday and it made 4.020 easy. Didn’t have to go 4.030.
So depending on which head we use, we can adjust the piston order accordingly.
I think the B302 chamber is a little smaller than the closed chamber 4v head if I remember right.
57-60 on the B302 vs 61-64 on the 4v closed heads.

We will planning between 10- 10 1/2 compression so I can use premium 93 pump gas.



Sent from my iPhone using Tapatalk
  Reply
#22
Excellent, sounds like you're hooked up with a good engine builder who is treating you right.


  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Intake alignment dowel removal help Phats 5 202 04-15-2019, 01:36 PM
Last Post: Jeff73Mach1
  Intake sucking air and not in a good way! scgamecock 15 430 03-24-2019, 10:47 AM
Last Post: scgamecock
  Intake valley pan, reuse it??? scgamecock 12 820 03-08-2019, 12:27 AM
Last Post: Spike Morelli
  Are these the right gaskets for head and intake? scgamecock 4 205 02-20-2019, 11:34 AM
Last Post: Carolina_Mountain_Mustangs
  1971 351C 2V Intake and carb question. turtle5353 42 1,638 01-12-2019, 09:13 AM
Last Post: Ron Tanzi
  Intake have to be on for a compression check? scgamecock 9 566 11-15-2018, 09:17 PM
Last Post: barnett468
  Edelbrock Torquer intake scgamecock 6 432 11-09-2018, 11:56 AM
Last Post: scgamecock
  Underside of Intake manifold Studdley 40 2,257 09-20-2018, 03:48 PM
Last Post: Ron Tanzi



Users browsing this thread: 1 Guest(s)