• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Kickdown Rod Install on Edelbrock 1406 and FMX
Anybody here have a 351C/FMX combo with an Eldebrock 1406 carburetor and OEM kickdown rod? Any advice/pictures would be appreciated. I called Eldebrock tech support but unfortunately, got somebody who didn't offer much help. He suggested #1483 kickdown linkage adapter.
Do you have the throttle lever kit (#1483) and the throttle lever plate (#1493)? If so, the installation is pretty straight forward, just follow the instructions. The last one I did, on a 390 FE, required some adjustment (minor bending) to the kickdown rod to get it right.

“If you can't explain it simply, you don't understand it well enough.”
--Albert Einstein
Another option would be a Lokar kickdown cable kit that won't need the kickdown adapter. The Edelbrock 1483 pushes the throttle cable out towards the valve cover a fair distance and messes up the geometry. If you do use the 1483, you should modify the cable mount to correct that. We've been using the Lokar cables on all of the Mopars my friends have built rather than the Rube Goldberg mechanical disaster that Chrysler created for them.


May you'd go for the Lokar, know their solution/provided bracket is ridiculously wrong for an FMX. The cable on itself is of good quality.

Middle of page, you can see here in detail. Even provided a pdf to make your own and have a kick down that works right away.

73 modified Grandé 351C. Almost done. 
71 429CJ. In progress
[+] 1 user Likes Fabrice's post
Share Thread:  

Possibly Related Threads…
Thread Author Replies Views Last Post
  excellent front spoiler install video Boss1Ray 0 295 12-15-2019, 09:17 AM
Last Post: Boss1Ray
Wrench Classic Air Install + OEM Heater / AC parts loche451 6 459 12-13-2019, 02:54 PM
Last Post: loche451
  C6 with Edelbrock Carb dwyerg 4 387 10-13-2019, 09:15 PM
Last Post: dwyerg
  Air for Edelbrock 1sostatic 10 828 10-11-2019, 08:35 AM
Last Post: Kilgon
  Stabilizer bar bushing install slowpoke17 1 241 04-21-2019, 09:12 AM
Last Post: SteveO_71

Users browsing this thread: 1 Guest(s)