• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
kick down lever/steering lock rod/ trans linkage
#1
Hello,

      Can anyone provide the correct set up for the above linkages on a 73 Mustang, 351C - 2v, C6 Auto, console mounted shifter.  I have to replace the kick down lever which had been modified by a previous owner and recently broke in two.  My feeling is that these linkages were not properl installed or adjsuted. Any schematic/photos/instructions would be appreciated. Have attached some photos of mine before I removed the broken kick down lever.  Thanks

steve
[Image: IMG-1286.jpg]

[Image: fullsizeoutput-74a.jpg]
  Reply
#2
I just posted the procedures:
https://www.7173mustangs.com/thread-auto...djustments



“If you can't explain it simply, you don't understand it well enough.”
--Albert Einstein
  Reply
#3
(01-06-2019, 07:42 PM)Don C Wrote: I just posted the procedures:
https://www.7173mustangs.com/thread-auto...djustments

Thanks very much !
  Reply
#4
(01-06-2019, 04:08 PM)naa10104 Wrote: Hello,

      Can anyone provide the correct set up for the above linkages on a 73 Mustang, 351C - 2v, C6 Auto, console mounted shifter.  I have to replace the kick down lever which had been modified by a previous owner and recently broke in two.  My feeling is that these linkages were not properl installed or adjsuted. Any schematic/photos/instructions would be appreciated. Have attached some photos of mine before I removed the broken kick down lever.  Thanks

steve
[Image: IMG-1286.jpg]

[Image: fullsizeoutput-74a.jpg]
Heer a couple of threads on the subject that may help.

https://www.7173mustangs.com/thread-c6-t...C6+linkage

https://www.7173mustangs.com/thread-how-...C6+linkage

[Image: C6_Linkage.jpg]
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Kickdown rod/cable Parkka 5 192 01-14-2019, 10:51 AM
Last Post: Fabrice
  C6 trans on 73 Mach 1 Coupelx 4 296 01-10-2019, 03:26 AM
Last Post: 164runner
  Throttle Linkage Modification Issue bigfoot72 6 207 01-05-2019, 01:56 PM
Last Post: Mister 4x4
  Curious about linkage jowens1126 2 128 01-04-2019, 09:07 PM
Last Post: jowens1126
  pull engine and trans as a unit? scgamecock 46 1,106 11-28-2018, 02:36 PM
Last Post: Fabrice
  Oil pump rod Robert sneed 12 465 11-13-2018, 06:44 PM
Last Post: jpaz
  429 motor and c6 trans Newold 3 411 09-09-2018, 06:23 AM
Last Post: Hemikiller
  Ratcheting Shift Lever timsweet 4 397 09-08-2018, 07:34 PM
Last Post: Don C



Users browsing this thread: 1 Guest(s)