• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Justin's 1973 Mach 1 "Q" Code
#41
One thing I could not see in your block. Is the brass baffle still under the thermostat? You need that in there and the correct Cleveland thermostat to keep temp correct.
Pic of one.

[Image: 100-3513.jpg]


When a man is in the woods and talks and no women are there is he still wrong??
Tongue
David
  Reply
#42
Headers fit just fine with an AOD.

73 Grandé H Code. Headman long tube headers, T-5 Transmission, 3.70 Traclok, Lowered 1" all around, Aussie 2v heads w/ 2.19 intake, 1.71 exhaust, screw in studs, full roller cam 608/612 lift 280/281 duration LSA 112, Quick Fuel 750 CFM double pumper, AirGap intake.

- Jason


[Image: 082-hot-rod-power-tour-2017-1970-1970s.jpg]
  Reply
#43
(02-12-2019, 04:48 PM)Carolina_Mountain_Mustangs Wrote: One thing I could not see in your block. Is the brass baffle still under the thermostat? You need that in there and the correct Cleveland thermostat to keep temp correct.
Pic of one.

[Image: 100-3513.jpg]
Yep, its there but thanks for the reminder.
  Reply
#44
Here are the D0AE-N quench heads we will install on the 357CI 4V Cleveland. Heads were originally set up for the Comp Cams hydraulic roller. All new springs, locks, and retainers. Dropping them off to be taken apart, check clearances, spring height unshroud the valves, valve job and reassemble. Hoping the unshrouding process will grow the combustion chamber by 5-7CC's. I figure the little Cleveland should achieve the 400-425hp goal fairly easy. My 15 year old is going to enjoy the streetable manners of the EFI and AOD.
[Image: IMG-0881.jpg]

[Image: IMG-0882.jpg]
  Reply
#45
If those are factory style 4 groove welded valve, throw them in the nearest dumpster and get a set of single piece valves. They have a tendency to snap the head off and the results are not pretty.


  Reply
#46
Hemikiller,
The answer to factory valves is "NO". Nah, the installed valves in D0AE-N heads are stainless but I do not know what brand. If they need to be replaced I will use Ferrera 5000 series since it a true street driven vehicle. If I were building to race we would probably do something more exotic along with titanium retainers and bee hive springs. Thanks for your input. I always welcome reminders on a build.
  Reply
Share Thread:  


Possibly Related Threads…
Thread Author Replies Views Last Post
  Summer deadline - 72 Mach 1 Build thread baz70 111 4,010 08-14-2019, 12:36 PM
Last Post: baz70
  My 71mach M code 72mach351 5 472 08-12-2019, 12:35 AM
Last Post: 72mach351
  From the top: ‘73 Q code convertible RC92234 24 748 07-10-2019, 08:12 AM
Last Post: RC92234
  1973 "Pro-Touring" project - Creator protouringstang73 482 48,064 07-04-2019, 02:54 PM
Last Post: protouringstang73
  72 Grabber Blue Mach 1 build 73429mach 144 23,400 07-02-2019, 05:09 AM
Last Post: 73429mach
  MuscleTang mod project thread (1971 M-Mach 1) tony-muscle 279 30,988 06-28-2019, 11:30 AM
Last Post: tony-muscle
  71 Euro Shelby (Mach 1) Clone whelessray 10 741 06-27-2019, 06:25 PM
Last Post: whelessray
  72 mach 1 Grandmas original first car libram 25 3,050 05-30-2019, 03:39 AM
Last Post: libram



Users browsing this thread: 1 Guest(s)