• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Jacking car up by front cross member
(09-14-2018, 08:51 PM)71fast Wrote: Remember the recall https://www.conceptcarz.com/recall/425/F...stang.aspx
I remember seeing the missed spot welds but didn't see the recall until the engine was already installed.

Mine was part of the recall, had a bunch of extra MIG welds done on the strut rod crossmember. I added a bunch of extra rosette welds while I was there. 

I don't jack under the engine xmember because it's a really long reach. Usually, I place jackstands on the frame rail in between the lower arms and the steering linkage.

Share Thread:  

Possibly Related Threads...
Thread Author Replies Views Last Post
  Ford Front Suspension Support Tool by Tommy Zees mustang7173 33 4,376 07-04-2018, 02:50 AM
Last Post: NOT A T5
  front disc brake conversion nailpounder 16 1,126 05-04-2018, 08:37 AM
Last Post: Stanglover
  front rotors Copestang 11 919 01-16-2018, 03:02 PM
Last Post: secluff
  Front disc brake swap master cylinder? Horsin' Around 10 832 12-18-2017, 09:58 PM
Last Post: imusa76
  71 Mustang front shocks are destroying top bushings 71BossPrototype 40 7,496 10-15-2017, 09:20 AM
Last Post: Carolina_Mountain_Mustangs
  self made front suspension support tools eddyw 6 1,118 09-29-2017, 03:28 PM
Last Post: Hemikiller
  Dumb question, how many sealing washers for brake hose to front caliper bolt? sciabola13 3 624 07-28-2017, 10:17 AM
Last Post: sciabola13
  Front Parking Brake Cable cheezsnake 5 966 07-07-2017, 03:00 PM
Last Post: 73429mach

Users browsing this thread: 1 Guest(s)