• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Items Needed for 71 Mach I
#1
I am down to weeks to finishing my car and need some hard to fine parts:
- throttle cable for a 429
- Hot air tube - flexable aluminum for air cleaner to exhaust
- Rubber gromets for Radiator Support - Discharge hose
- 14 guage Fusable Link (wire)
If you have or know where I can get them that would be great. I have tried Harris Mustang, NPD, CJ Pony, and Ohio Mustang.
Thanks,
Dave
  Reply
#2
71mach429;80673 Wrote:I am down to weeks to finishing my car and need some hard to fine parts:
- throttle cable for a 429
- Hot air tube - flexable aluminum for air cleaner to exhaust
- Rubber gromets for Radiator Support - Discharge hose
- 14 guage Fusable Link (wire)
If you have or know where I can get them that would be great. I have tried Harris Mustang, NPD, CJ Pony, and Ohio Mustang.
Thanks,
Dave

Do you need new or used? I may have used. May need some pictures such as fusible link, discharge hose grommets etc. I have 28 71-73 parts cars. Mike

Thanks from MotorCity Mustang!
http://stores.ebay.com/MotorCity-Mustang
  Reply
#3
Hot air tube

http://www.ebay.com/itm/NOS-69-70-71-72-...55&vxp=mtr
  Reply
#4
Fusible Link: http://www.madelectrical.com/catalog/fusible-link.shtml
  Reply
#5
Motorcity Mustang;80733 Wrote:
71mach429;80673 Wrote:I am down to weeks to finishing my car and need some hard to fine parts:
- throttle cable for a 429
- Hot air tube - flexable aluminum for air cleaner to exhaust
- Rubber gromets for Radiator Support - Discharge hose
- 14 guage Fusable Link (wire)
If you have or know where I can get them that would be great. I have tried Harris Mustang, NPD, CJ Pony, and Ohio Mustang.
Thanks,
Dave

Do you need new or used? I may have used. May need some pictures such as fusible link, discharge hose grommets etc. I have 28 71-73 parts cars. Mike


I'll take either on the throttle cable as long as it is in good shape. Looks like I can get the flex tubing at O'Reilly's or Autozone (thanks Eddie) so will try there tomorrow. I'll try and get pictures of the rubber gromets. Appreciate everyone's help! Dave

midlife;80751 Wrote:Fusible Link: http://www.madelectrical.com/catalog/fusible-link.shtml

This is a great link! Just what I needed. Thank you.
  Reply
#6
71mach429;80953 Wrote:
Motorcity Mustang;80733 Wrote:
71mach429;80673 Wrote:I am down to weeks to finishing my car and need some hard to fine parts:
- throttle cable for a 429
- Hot air tube - flexable aluminum for air cleaner to exhaust
- Rubber gromets for Radiator Support - Discharge hose
- 14 guage Fusable Link (wire)
If you have or know where I can get them that would be great. I have tried Harris Mustang, NPD, CJ Pony, and Ohio Mustang.
Thanks,
Dave

Do you need new or used? I may have used. May need some pictures such as fusible link, discharge hose grommets etc. I have 28 71-73 parts cars. Mike


I'll take either on the throttle cable as long as it is in good shape. Looks like I can get the flex tubing at O'Reilly's or Autozone (thanks Eddie) so will try there tomorrow. I'll try and get pictures of the rubber gromets. Appreciate everyone's help! Dave

midlife;80751 Wrote:Fusible Link: http://www.madelectrical.com/catalog/fusible-link.shtml

This is a great link! Just what I needed. Thank you.

Checked all the cars but don't have one that is 23.75 inches long (unique to 429). However, you should be able to get a new one from Don at OMS (will be reproduction, but the length will be correct). Mike

Thanks from MotorCity Mustang!
http://stores.ebay.com/MotorCity-Mustang
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  [WTB] Parts for a 1971 Mach 1 Heardatbeat 8 252 05-29-2018, 10:50 AM
Last Post: Carolina_Mountain_Mustangs
  [WTB] MACH 1 HOOD with inserts wanted shipping to expensive now not wanted Nige 0 256 03-11-2018, 01:43 PM
Last Post: Nige
  73 Mach 1 Coupelx 6 291 02-09-2018, 04:41 PM
Last Post: Coupelx
  Interior bits needed - 73 coupe shaheenk 6 434 12-27-2017, 02:43 PM
Last Post: shaheenk
  [WTB] 71-72 mach 1 grill center support bracket jowens1126 18 1,186 12-05-2017, 09:07 PM
Last Post: jowens1126
  Quarter Window Interior Mouldings Needed Tegemus 1 287 11-18-2017, 01:07 AM
Last Post: Tegemus
  [WTB] 72 mach one pillar post moldings saturn 0 240 10-24-2017, 06:52 PM
Last Post: saturn
  [WTB] Heavy Duty Hood Springs for 72 NASA Hood needed cristobal33 3 595 10-22-2017, 08:30 PM
Last Post: dieseldave



Users browsing this thread: 1 Guest(s)