• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Is this rear inner wheel arch patch panel available?
#1
Got some rusty inner rear wheel arch sections that I've wire brushed back to expose the damaged sections and trying to figure out approach to cutting and putting in clean metal....

is a patch panel available for this section alone or the whole inner wheel arch only ?

[Image: FQs-ES9lk-Q7-Kb5qh-Ohk-ZGrg.jpg]
  Reply
#2
I made my own for my car but if you want just that section you need to buy whole arch and cut out what you need. I used both the patch panel and cut out what I needed on the yellow Mach 1 I did. 

[Image: 3-BBFE681-E2-B6-446-F-9473-040-F0-C12-C10-E.jpg]

[Image: 08-FA2593-0-F04-4371-8970-FAEE7-AEB05-B2.jpg]

[Image: 99-F50807-2511-4076-91-CB-B42-EFBEB31-C4.jpg]

[Image: 2-CB18-A4-C-B5-EC-45-BE-A41-C-E5-F54-F0-E0519.jpg]

[Image: 002-D3345-C498-4-DFB-A53-A-997-F2758-B1-A1.jpg]

Kevin

1971 Mach 1
408C Stroker
C4 w/3,000 stall
8.8" Rear w/3.73's
Disc brakes all way around.

https://youtu.be/SoW1fhaFPzY  Burn Out Video. 

[Image: 044.jpg]
  Reply
#3
I bought the whole outer wheelhouse and cut about 10% off for my patch.


[Image: F5-EF468-B-5850-48-B7-9-DF8-EF4-ACDB38692.jpg]
  Reply
#4
thanks both. I think i am going to cut out bottom of rear wing for ease of access and then make a patch panel to go in and then weld back in.... If it doesn't work out I'll get the whole rear wheelarch.....
  Reply
#5
If you have a shot bag plastic hammer and english wheel pretty easy to make them so small.


When a man is in the woods and talks and no women are there is he still wrong??
Tongue
David
  Reply
#6
Like others here, i also bought the whole panel to cut a few inches of the rear tip.

Sent from my SAMSUNG-SM-G930A using Tapatalk

[Image: 20160929_171923_edit2_small.jpg]

1971 M-Code Mach 1 w/Ram Air, 408 stroker, 285/291 0.558" roller cam, Blue Thunder intake, TKO600, Hooker headers with electric cut-offs, FiTech EFI w/ RobBMC PowerSurge pump
Strange center section with Truetrac, 3.5 gear and 31 spline axles, 4-wheel disc brakes
  Reply
#7
(09-02-2019, 09:33 AM)tony-muscle Wrote: Like others here, i also bought the whole panel to cut a few inches of the rear tip.

Sent from my SAMSUNG-SM-G930A using Tapatalk
thanks, is this the part ?
https://www.npdlink.com/product/quarter-...?year=1972
  Reply
#8
Looks like it but double check with NPD. I got mine from CJPonny. Today is their last day of their weekend sale. If not in stock they can be very unreliable though.

Sent from my SAMSUNG-SM-G930A using Tapatalk

[Image: 20160929_171923_edit2_small.jpg]

1971 M-Code Mach 1 w/Ram Air, 408 stroker, 285/291 0.558" roller cam, Blue Thunder intake, TKO600, Hooker headers with electric cut-offs, FiTech EFI w/ RobBMC PowerSurge pump
Strange center section with Truetrac, 3.5 gear and 31 spline axles, 4-wheel disc brakes
  Reply
Share Thread:  


Possibly Related Threads…
Thread Author Replies Views Last Post
  Rocker Panel replacement 72Mach168Cam 4 158 12-22-2019, 11:44 AM
Last Post: 72Mach168Cam
  Taillight panel top edge Vinnie 3 327 11-26-2019, 02:16 AM
Last Post: Vinnie
  In trunk brackets / taillight panel Vinnie 2 236 11-25-2019, 08:45 AM
Last Post: Carolina_Mountain_Mustangs
  pedestal mounts for rear wing ponypastor 2 287 11-02-2019, 07:21 AM
Last Post: ponypastor
  Quarter panel rust repair recommendations? cwalker509 1 258 10-12-2019, 05:49 PM
Last Post: kcmash



Users browsing this thread: 1 Guest(s)