• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
In need of a vacuum tree or alternatives
#1
I need to hookup my brake booster hose up into the manifold. Do i need a vacuum tree or would a 3/8 NPT fitting with a hase barbed end work?

The only port i have left on the intake is in the back. I know that the thread size is 3/8 NPT

"Do it once, do it right!"
  Reply
#2
mikepasquale1;56868 Wrote:I need to hookup my brake booster hose up into the manifold. Do i need a vacuum tree or would a 3/8 NPT fitting with a hase barbed end work?

The only port i have left on the intake is in the back. I know that the thread size is 3/8 NPT

Do you have any other accessories to be hooked up to the vacuum? Auto tranny? If not, you can use a 3/8" barbed nipple without the tree. If you need a tree, I have a few extra.
  Reply
#3
Don at OMS delivered. Thanks again Don!!

"Do it once, do it right!"
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Electric ported vacuum switch wiring Rozz 1 531 04-07-2014, 07:58 PM
Last Post: Rozz
  WTB: 351C 4V Air Cleaner Assembly with vacuum valve Don61 6 1,288 12-19-2013, 08:16 PM
Last Post: Don61



Users browsing this thread: 1 Guest(s)