• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Ideas Where To Buy Engine Block?
#1
Hello everyone,

I'm looking around for a date code correct 351C-4V engine block or even a complete one. Tried searching many sites like ebay/craigslist but I don't see any. The junkyards here suck and only have 1996+ years of cars. Anyone know where I could find one? Huh

Thanks
  Reply
#2
Lots on craigslist if you wanna drive. Since you're in cleveland I would check with Don at OMS. Im sure he could hook you up with something.

https://ashtabula.craigslist.org/pts/d/a...19425.html

https://newjersey.craigslist.org/pts/d/f...90785.html

https://hudsonvalley.craigslist.org/pts/...32501.html

https://fingerlakes.craigslist.org/pts/d...26539.html

https://buffalo.craigslist.org/pts/d/orc...58225.html



https://rochester.craigslist.org/pts/d/v...96169.html

https://rochester.craigslist.org/pts/d/b...33286.html

Kevin

1971 Mach 1
408C Stroker
C4 w/3,000 stall
8.8" Rear w/3.73's
Disc brakes all way around.

https://youtu.be/SoW1fhaFPzY  Burn Out Video. 

[Image: 044.jpg]
[+] 1 user Likes turtle5353's post
  Reply
#3
Try searchtempest.com Its a craigslist oriented site that can cover the country. Use as few words as possible in your search. Good luck. Ed
  Reply
#4
(11-06-2019, 04:48 AM)icejawa Wrote: Hello everyone,

I'm looking around for a date code correct 351C-4V engine block or even a complete one. Tried searching many sites like ebay/craigslist but I don't see any. The junkyards here suck and only have 1996+ years of cars. Anyone know where I could find one? Huh

Thanks
What date code are you looking for

Ohio Mustang Supply
440-949-2556

[Image: oms_sig_banner.jpg]
  Reply
#5
There is/was a complete but stripped 351C 2V D2AE-CA engine I posted about recently, but it is in Ontario. See 71 73 Mustang Talk. I say 'was' because I have not checked the ad lately.
He wants 400 buck for it. IF you want this on, I can pick it up and bring it to my place, closer to the border.
Geoff.

Geoff.
 I learn something new every day!
  Reply
#6
(11-06-2019, 08:52 AM)OMS Wrote:
(11-06-2019, 04:48 AM)icejawa Wrote: Hello everyone,

I'm looking around for a date code correct 351C-4V engine block or even a complete one. Tried searching many sites like ebay/craigslist but I don't see any. The junkyards here suck and only have 1996+ years of cars. Anyone know where I could find one? Huh

Thanks
What date code are you looking for

His Marti report shows a 10/6/70 build date. I don't have anything that early in the '71 model year. 

https://ibb.co/cgsa0y



TMeyer posted on FB the other day he is going to start offering completely CNC machined original 351C blocks. I believe it's going to be core based or exchange, but might be worth an email to see if he has one in your date range. $1100 for the works is pretty good IMO. 

https://www.tmeyerinc.com/


Attached Files Thumbnail(s)
   


  Reply
#7
That is a good price, I had to fork out $1,000 for a complete '72 CJ engine, stock bore. Still needs cleaned, magnafluxed, bored, etc.

Another possible source is Barnett, he used to sell bare blocks, but I don't see them listed now, probably ran out of cores. Might be worth a call, though.
https://barnetthighperformance.com/



“If you can't explain it simply, you don't understand it well enough.”
--Albert Einstein
  Reply
#8
(11-06-2019, 01:56 PM)Don C Wrote: That is a good price, I had to fork out $1,000 for a complete '72 CJ engine, stock bore. Still needs cleaned, magnafluxed, bored, etc.

Another possible source is Barnett, he used to sell bare blocks, but I don't see them listed now, probably ran out of cores. Might be worth a call, though.
https://barnetthighperformance.com/


I highly recommend NOT using barnett!  Hes a crook and a thief in my book!!!!  Burned me for a lot of money and sold me junk parts at high end prices!!!!   USE AT YOUR OWN RISK

Kevin

1971 Mach 1
408C Stroker
C4 w/3,000 stall
8.8" Rear w/3.73's
Disc brakes all way around.

https://youtu.be/SoW1fhaFPzY  Burn Out Video. 

[Image: 044.jpg]
  Reply
#9
Good to know, thanks.



“If you can't explain it simply, you don't understand it well enough.”
--Albert Einstein
  Reply
#10
Ironically, this post is more timely than ever. "Me, too" 1973 Q code
  Reply
Share Thread:  


Possibly Related Threads…
Thread Author Replies Views Last Post
  Engine Rebuild and color Parkka 8 260 03-22-2020, 06:18 PM
Last Post: Hemikiller
  Engine running crummy jpaz 17 1,155 02-24-2020, 09:18 PM
Last Post: jpaz
nuke Ford Racing 460 Boss small block. DeathWobble 8 403 02-12-2020, 12:25 AM
Last Post: DeathWobble
  351c engine tag location and decoding machattack 3 447 01-28-2020, 10:37 AM
Last Post: machattack
  Mystery surrounding my engine and chassis serial numbers tony-muscle 25 3,101 01-23-2020, 12:24 PM
Last Post: mjlan



Users browsing this thread: 1 Guest(s)