Hood twist locks

[73Qcode]

Hello all was wondering if anyone can help me out on getting the stencil cutout template for installing the twist lock for the nascar hood thanks

[Jeff73Mach1]

I added them to my hood and did a write up. The underside of the ducted hoods have a circular opening for each hood lock in the inner structure,

http://www.7173mustangs.com/thread-hood-lock-install

[jb73Mach]

I added them to my hood and did a write up. The underside of the ducted hoods have a circular opening for each hood lock in the inner structure,

http://www.7173mustangs.com/thread-hood-lock-install

Do you have a picture of the other end of the setup? I have the hood components installed (incorrectly) but not the parts that they connect to around the radiator. PO just bolted in the pins - no springs and they do not rotate (But they do look good!). I'd like to fix that and a picture of the necessary parts or other advice will be appreciated.

[OMS]

I added them to my hood and did a write up. The underside of the ducted hoods have a circular opening for each hood lock in the inner structure,

http://www.7173mustangs.com/thread-hood-lock-install

Do you have a picture of the other end of the setup? I have the hood components installed (incorrectly) but not the parts that they connect to around the radiator. PO just bolted in the pins - no springs and they do not rotate (But they do look good!). I'd like to fix that and a picture of the necessary parts or other advice will be appreciated.

You can go to my site and see all the parts.

Item #71HDLCKSET/R
71-73 HOOD LOCK KIT, COMPLETE 32 PIECES
Reproduction twist lock set up. Includes two hood locks, two radiator brackets, two original tooling catches, two original tooling retainers, AMK fastener kit F-1351 (12 pc kit), AMK fastener kit F-1631 (8 pc kit) and AMK fastener kit F-1630 (4 pc kit).

[Jeff73Mach1]

I'll post up a picture tomorrow if you still need it.

[jb73Mach]

Thanks - a picture would be great.