• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Holley Sniper EFI HyperSpark Distributor Kit
#1
Anyone have experience with this kit? I'm still putting the pieces together for my 408 that was just built. I'm 90% sure I'm going with Holleys EFI sniper master kit. I still need a distributor and ignition system regardless if I go EFI or not. Was figuring the more like stuff I used the better but was wondering if anyone had feedback on this or will I be the first here...

This is the Chevy kit but just to give an idea

https://www.jegs.com/i/Holley/510/550-511DK/10002/-1
  Reply
#2
I think that the Holley ignition parts are required if you want to use the Holley ECU to control timing.

Is timing control available on the Sniper or do you have to step up to the Teeminator?

I have no personal experience with either option but was planning on using a Terminator on my car if I ever make it that far...

-Matt
  Reply
#3
I just did a super sniper with hyperspark. I had a cd box and different coil but it’s the same oil/play.


Pretty darn easy install IMO.
The supersniper will control the timing curve right out of the box.
You just tell it maximum timing and it automatically sets the lowest.

There are a BUNCH of good set up videos on YouTube.



Sent from my iPhone using Tapatalk
  Reply
#4
(04-29-2019, 11:34 AM)mikeyhunts Wrote: I just did a super sniper with hyperspark. I had a cd box and different coil but it’s the same oil/play.


Pretty darn easy install IMO.
The supersniper will control the timing curve right out of the box.
You just tell it maximum timing and it automatically sets the lowest.

There are a BUNCH of good set up videos on YouTube.



Sent from my iPhone using Tapatalk

Cool. Which coil did you use? You used Holleys dual sync distributor? Did you use the intake kit and if so did you just cut out your existing one or did you find a tank with the cutout ready to go? Sorry for all the questions. Thanks 
  Reply
#5
(04-29-2019, 08:48 AM)73\ mach 1 Wrote: Anyone have experience with this kit? I'm still putting the pieces together for my 408 that was just built. I'm 90% sure I'm going with Holleys EFI sniper master kit. I still need a distributor and ignition system regardless if I go EFI or not. Was figuring the more like stuff I used the better but was wondering if anyone had feedback on this or will I be the first here...

This is the Chevy kit but just to give an idea

https://www.jegs.com/i/Holley/510/550-511DK/10002/-1

Have a friend who stroked his 351C to 408. He went with...

 Holley sniper EFI - part# 550-510 
 Holley sniper dual sync distributor - part# 565-210
 Holley EFI adapter harness - part# 558-493

He is very happy with it. As I understand the Holley sniper dual sync distributor comes with crank and cam sensors to support sequential Holley EFI setup. It's all self-tuning.
  Reply
#6
I put in a new fuel cell, new Holley external fuel pump, so my application is a bit different.

I went with the hyperspark, not the dual sync.
Pretty sure there is a difference.
The hyperspark is specifically designed to pair with the sniper.




Sent from my iPhone using Tapatalk
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Holley sniper efi system andresde71 6 352 06-04-2019, 03:21 PM
Last Post: mikeyhunts
  What's an ok C6 Rebuild kit? Fabrice 6 214 05-07-2019, 06:11 PM
Last Post: Fabrice
  351C EFI don blanchard 13 678 04-28-2019, 11:01 PM
Last Post: detritusmaximus
  2.5'" Dual exhaust kit recommendations The Dapper Wolf 3 313 03-27-2019, 05:43 PM
Last Post: The Dapper Wolf
  Holley Dual Feed Line kcmash 7 239 03-18-2019, 04:27 PM
Last Post: Stanglover
  RAM AIR - manifold and distributor dfayette 6 405 03-10-2019, 12:48 PM
Last Post: jpaz
  Is my 351C Distributor 180 out? andy72 14 643 02-28-2019, 11:09 AM
Last Post: Danoh1
  Ram Air Kit Jean-Pierre 4 378 02-26-2019, 10:29 PM
Last Post: Jean-Pierre



Users browsing this thread: 1 Guest(s)