• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Hole identification
#1
I have four holes in the top of the firewall. I want to know what fits in these holes. Are they places where parts go to hold the windshield washer hose in place


[Image: 4holes.png]

Steve
1971 Grandé
  Reply
#2
Your strut tower braces are missing. They attach there.

'73 Grandé H Code. Headman long tube headers, T-5 Transmission, 3.70 Traclok, Lowered 1" all around, Aussie 2v heads w/ 2.19 intake, 1.71 exhaust, screw in studs, full roller cam 608/612 lift 280/281 duration LSA 112, Quick Fuel 750 CFM double pumper, AirGap intake.

'73 F code convertible. Bright red. Needs total restore. (IE HOT MESS)

- Jason
  Reply
#3
This thread has good photos of the engine bay.

https://www.7173mustangs.com/thread-engi...-71-mach-1

'73 Grandé H Code. Headman long tube headers, T-5 Transmission, 3.70 Traclok, Lowered 1" all around, Aussie 2v heads w/ 2.19 intake, 1.71 exhaust, screw in studs, full roller cam 608/612 lift 280/281 duration LSA 112, Quick Fuel 750 CFM double pumper, AirGap intake.

'73 F code convertible. Bright red. Needs total restore. (IE HOT MESS)

- Jason
  Reply
#4
You can see the braces and bolts in this picture...

[Image: 20170517_174558_r.jpg]

1973 H Code Convertible - Medium Copper Metallic - June 8, 1973, Built Ford Marketing Sales Vehicle
[Image: DSC_0266xsm.jpg]
[Image: satellite.png] Proud Space Junk Award Winner!












  Reply
#5
Strut braces are in now. That was a pic from couple of months ago. Doh!!!
Can someone post a pic of how the washer hose is supported. mine seem to droop down

Steve
1971 Grandé
  Reply
#6
There are holes on the rear edge on the underside of the hood that a clip fits into. The washer hose was attached to those clips.


  Reply
#7
(06-11-2018, 02:24 PM)Hemikiller Wrote: There are holes on the rear edge on the underside of the hood that a clip fits into. The washer hose was attached to those clips.

Thanks Hemikiller
Anyone got pictues of clips and are they available to buy repo?

Steve
1971 Grandé
  Reply
#8
Here is some good info. There is one pic that shows the clip really well. They are about 2" long with a sight concave then the hose is taped to it.

https://mach1club.com/showthread.php?tid=4108

'73 Grandé H Code. Headman long tube headers, T-5 Transmission, 3.70 Traclok, Lowered 1" all around, Aussie 2v heads w/ 2.19 intake, 1.71 exhaust, screw in studs, full roller cam 608/612 lift 280/281 duration LSA 112, Quick Fuel 750 CFM double pumper, AirGap intake.

'73 F code convertible. Bright red. Needs total restore. (IE HOT MESS)

- Jason
  Reply
#9
Thanks Pony

Steve
1971 Grandé
  Reply
#10
Here are a couple pics of mine as well as a close up of the clip. I did have to abandon the portion that is inside the hood and route mine directly to the first nozzle. Hope this helps.


[Image: washer_clip.jpg]

[Image: Washer_hose.jpg]

'73 Grandé H Code. Headman long tube headers, T-5 Transmission, 3.70 Traclok, Lowered 1" all around, Aussie 2v heads w/ 2.19 intake, 1.71 exhaust, screw in studs, full roller cam 608/612 lift 280/281 duration LSA 112, Quick Fuel 750 CFM double pumper, AirGap intake.

'73 F code convertible. Bright red. Needs total restore. (IE HOT MESS)

- Jason
  Reply
Share Thread:  


Possibly Related Threads...
Thread Author Replies Views Last Post
  Transmission Identification Helicopter 4 318 05-12-2018, 06:37 AM
Last Post: TommyK
  Dimensions for Air Conditoner hole in Firewall Carolina_Mountain_Mustangs 3 951 07-30-2015, 10:08 AM
Last Post: Carolina_Mountain_Mustangs
  Softball size hole in top of fender jrgeorge1112 11 1,683 02-12-2013, 11:38 PM
Last Post: jrgeorge1112
  Parts Identification Mustruck 3 714 01-26-2013, 10:59 AM
Last Post: turtle5353
  Help with Motor Identification Machman 3 957 07-13-2012, 12:16 PM
Last Post: Machman
  block identification win1897 7 1,626 09-03-2011, 07:49 AM
Last Post: Boss1Ray
  Head threaded hole? Collardgreen 5 1,425 08-02-2011, 07:14 PM
Last Post: Collardgreen



Users browsing this thread: 1 Guest(s)