• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Help! Not sure how to mount the power steering pump 351W
(08-11-2018, 06:41 PM)Ballaratcastle Wrote:
(08-10-2018, 09:58 AM)Don C Wrote: The deck height of 1974 and up 351Ws is taller than pre 1974, so you may need a later bracket.

Thanks Don. 
The engine was previously in the car with those brackets when it was taken out 5yrs ago for restoration but I have replaced the heads. I might need to check the old heads for the adapter part as I left them with the engine rebuilders. 

Hi Don. The numbers on my 351 show D4AE -6015-AA2 568 so looking at your link you supplied the deck height is 9.503. The bracket that came with the engine is D10A-3C511-AA and I have just found the front pulley on the steering pump is warped/bent from probably being dropped or hitting the deck when sitting in the car for the last 5 years without the engine in. Do you know the code of the later brackets I can google to try and source please. And also the correct pulley. Cheers
Sorry, I don't, my parts book is just good through 1973.

You might try Jeff's Bronco Graveyard, they're a good resource and source for these kinds of parts

Steve (Secluff) has a complete library of parts books and might be able to help.

“If you can't explain it simply, you don't understand it well enough.”
--Albert Einstein
[+] 1 user Likes Don C's post
The bracket you have looks to be a 351C application. I'll check the brackets I have at home, I might have a 302 P/S bracket that *in theory* should work with the adapter plate. I might also have a P/S pump pulley in my bins.

[+] 1 user Likes Hemikiller's post
Share Thread:  

Possibly Related Threads…
Thread Author Replies Views Last Post
  Injection fuel pump for factory gas tank mustang7173 3 236 12-08-2019, 11:33 AM
Last Post: B229218
  Dynamic Compression Ratio for Pump Gas wrobinson 9 327 11-25-2019, 11:26 AM
Last Post: wrobinson
  C6 front pump bushing question dohcsvt 0 156 11-10-2019, 10:07 AM
Last Post: dohcsvt
  High Volume Oil Pump Parkka 8 291 10-30-2019, 09:22 AM
Last Post: Stanglover
  351C Solid Engine Mount???? jdwest711 6 328 10-29-2019, 08:13 PM
Last Post: jdwest711

Users browsing this thread: 1 Guest(s)