Help! Not sure how to mount the power steering pump 351W

[Ballaratcastle]

The deck height of 1974 and up 351Ws is taller than pre 1974, so you may need a later bracket.
https://www.7173mustangs.com/showthread.php?tid=20132

Thanks Don. 
The engine was previously in the car with those brackets when it was taken out 5yrs ago for restoration but I have replaced the heads. I might need to check the old heads for the adapter part as I left them with the engine rebuilders. 
Cheers
Steve

Hi Don. The numbers on my 351 show D4AE -6015-AA2 568 so looking at your link you supplied the deck height is 9.503. The bracket that came with the engine is D10A-3C511-AA and I have just found the front pulley on the steering pump is warped/bent from probably being dropped or hitting the deck when sitting in the car for the last 5 years without the engine in. Do you know the code of the later brackets I can google to try and source please. And also the correct pulley. Cheers

[Don C]

Sorry, I don't, my parts book is just good through 1973.

You might try Jeff's Bronco Graveyard, they're a good resource and source for these kinds of parts
https://broncograveyard.com/

Steve (Secluff) has a complete library of parts books and might be able to help.

[Hemikiller]

The bracket you have looks to be a 351C application. I'll check the brackets I have at home, I might have a 302 P/S bracket that *in theory* should work with the adapter plate. I might also have a P/S pump pulley in my bins.