• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
HELP! '72 Side Moulding and Clips
#1
Wrench 
I'm looking for some help. I'll include pictures to illustrate my question. just the other day, a small piece of chrome side moulding came off of my car, and I'm not sure how it goes back on. The clips are still in place and the piece looks intact, but I can't seem to figure out how the clips work! If anyone has any advice or ideas about how I could fix this, please let me know!
[Image: image1.jpg]

[Image: image2.jpg]

[Image: image3.jpg]

[Image: image4.jpg]
  Reply
#2
Those clips have small studs that go through into the inside of the car with nuts on them. You will have to remove the rear interior quarter panel trim inside. Then you should be able to look in there and see the studs sticking through with the nuts on them. You will need to remove the nuts and pull the clips out. You may need new clips, but cant tell by the looks of it. Once the clips and stud assembly is out you can slide them into the grove on the backside of the trim piece. The wire spring attached should hold them in place for you.  You may want to check that the groove in the trim piece is not bent out and that the spring holds the stud in there tightly. Then reinstall trim back on the car with the studs going through the holes and attach the nuts on the inside. replace interior trim panel and done.

[Image: 64-41903.jpg]
Kevin

1971 Mach 1
408C Stroker
C4 w/3,000 stall
8.8" Rear w/3.73's
Disc brakes all way around.

[Image: 28ivsix.png]




                                                                                             
  Reply


Possibly Related Threads...
Thread Author Replies Views Last Post
  Another side stripe install question sdstang 16 870 08-21-2017, 03:44 PM
Last Post: Stanglover
  Driver side mirror bezel? turtle5353 7 491 05-10-2017, 06:00 AM
Last Post: turtle5353
  Body Side Moldings (protection package) Kevin J 12 866 04-23-2017, 03:37 PM
Last Post: 73 Conv. 4speed Q code
  Correct appearance of trunk side of tail light panel tony-muscle 10 844 03-07-2017, 08:53 AM
Last Post: tony-muscle
  Speed nuts for rear side marker bezel thomas1984 9 1,257 05-20-2016, 12:44 AM
Last Post: thomas1984
  Need several mounting clips Grande-Bavaria 11 851 04-17-2016, 05:21 AM
Last Post: Grande-Bavaria
  Side stripe stencil alwazmt 17 2,071 04-26-2015, 01:33 AM
Last Post: Spike Morelli
  Advice on PPG black paint for hood and lower side accents JamesS 16 3,072 03-29-2015, 03:15 PM
Last Post: Qcode351mach



Users browsing this thread: 1 Guest(s)