• 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Heater box seal rplm't
Just replaced the seals in my heater box. Aside from a small problem when installing the heater core back in place with all new seals it went pretty well. Just one question..............there is a gap between the heater blend door and the lower metal frame of about 1". This is in a static condition on my workbench. It looks like if I trimmed some of the seal this door would close fully. I have the seal glued in place using the beveled corner as a guide. Should the blend door completely close, or is there supposed to be a small gap? The seal is definitely keeping the door open slightly. Also by moving the cable controlled actuator arm manually there is also the same gap at both ends of travel. I guess my question is, should the blend door close tight at both extremes of travel? I am thinking that when connected to the cable, it would be physically forced to the extremes.
That's normal. Mine is too.

[Image: 2rr7aiv.png]

Just cruising along minding our own business when BAM!!! The LAWS show up.
That's normal. Mine is too.
Whew!! Thanks...........
Is it true there is no kit for a non ac 71 mustang heater box? I'm sure I could create my own but I usually take the easy route if possible. Are there supposed to be "caps" on either end of the core to keep it from flopping around? Thanks again for any help
Share Thread:  

Possibly Related Threads...
Thread Author Replies Views Last Post
runninpony glove box light switch and light NOT A T5 9 556 07-06-2018, 07:53 PM
Last Post: rackerm
runninpony Carpenter Hood to Cowl Seal NOT A T5 6 429 05-27-2018, 08:03 AM
Last Post: NOT A T5
  glove box trim deluxe Copestang 2 397 03-25-2018, 04:16 PM
Last Post: Copestang
  Glove Box Striker OzCoupe72 11 1,045 11-18-2017, 04:33 AM
Last Post: rackerm
runninpony Heater Core Non A/C Car NOT A T5 4 744 08-13-2017, 04:30 PM
Last Post: NOT A T5
  AC heater box vacuum line diagram mwilson7 3 622 08-02-2017, 09:21 AM
Last Post: mwilson7
  Non-ac heater box Capn_Morgan 2 421 08-01-2017, 07:26 PM
Last Post: MikeGriese
  trunk seal install 87fox72mach 5 806 11-25-2016, 08:21 PM
Last Post: Austin Vert

Users browsing this thread: 1 Guest(s)